1.REMOVE FRONT WHEEL
2.REMOVE SIDE STEP ASSEMBLY LH (for 5 Door)
48826D
3.REMOVE STABILIZER CONTROL VALVE PROTECTOR
4.DRAIN SUSPENSION FLUID
52129B
5.REMOVE LOWER FRONT BUMPER COVER
51405A
6.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
7.REMOVE FRONT SUSPENSION MEMBER BRACE SUB-ASSEMBLY
Remove the 6 bolts and 2 member braces from the front frame assembly.
8.REMOVE FRONT STABILIZER END BRACKET
Remove the 4 bolts and 2 brackets from the lower arm.
48811
9.REMOVE FRONT STABILIZER BAR
Remove the 4 bolts, 2 front stabilizer lower brackets and front stabilizer bar.
Remove the 2 front stabilizer link bushes and front stabilizer lower bracket bushes from the stabilizer bar front.
53737B
10.REMOVE FRONT FENDER APRON SEAL LH
Remove the 7 clips and front apron seal LH.
51419
11.REMOVE FRAME APRON SEAL BRACKET
Remove the bolt and bracket.
48890
12.DISCONNECT NO. 1 FRONT STABILIZER CONTROL TUBE ASSEMBLY
Using a union nut wrench, disconnect the front stabilizer control tubes.
Remove the bolt.
48870
13.REMOVE FRONT STABILIZER WITH TUBE CYLINDER ASSEMBLY
Remove the bolt, nut and front stabilizer with tube cylinder assembly.
Turn the bolt while holding the nut.
Do not loosen or remove the flare nuts labeled A and B in the illustration.
Do not hold the front stabilizer with tube cylinder assembly by the cylinder boot.
Remove the 2 bleeder plug caps and bleeder plugs from the front stabilizer with tube cylinder assembly.
48820B
14.REMOVE FRONT STABILIZER LINK ASSEMBLY RH
Remove the bolt, spacer and front stabilizer link assembly.