Home › Suspension › REAR SUSPENSION › REAR STABILIZER BAR (w/ KDSS)
RM27T0E _53 Suspension _053709 REAR SUSPENSION _0260898 REAR STABILIZER BAR(w/ KDSS) A

REAR SUSPENSION  REAR STABILIZER BAR(w/ KDSS)  REMOVAL  


PROCEDURE

Hide 1.REMOVE SIDE STEP ASSEMBLY LH (for 5 Door)

Hide 48826D 2.REMOVE STABILIZER CONTROL VALVE PROTECTOR

Hide 4.REMOVE REAR STABILIZER LOWER BRACKET

a.
C214450

Remove the 4 bolts and 2 rear stabilizer lower brackets.


Hide 48805 5.REMOVE REAR STABILIZER BAR SUB-ASSEMBLY

a.
C214762

Remove the 2 bolts, 2 nuts and rear stabilizer bar.

NOTICE:

Turn the bolts while holding the nuts.



b.

Remove the 2 stabilizer bushes from the rear stabilizer bar.


Hide 48880 6.DISCONNECT REAR STABILIZER CONTROL TUBE ASSEMBLY

a.
C214763

Remove the 2 union bolts and 2 pressure port gaskets and disconnect the rear stabilizer control tube from the rear stabilizer control cylinder.


Hide 48885 7.REMOVE REAR STABILIZER CONTROL CYLINDER

a.
C214764

Remove the bolt, nut and rear stabilizer control cylinder.

NOTICE:

Do not hold the rear stabilizer control cylinder by the cylinder boot.


HINT:

Turn the nut while holding the bolt.



b.

Remove the 2 bleeder plug caps from the rear stabilizer control cylinder.


Hide 48830 8.REMOVE REAR STABILIZER LINK ASSEMBLY

a.
C214765

Remove the bolt, nut and rear stabilizer link assembly.

HINT:

Turn the nut while holding the bolt.