Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ANTI-LOCK BRAKE SYSTEM › 2015.06–2017.08
RM27T0E _54 Brake _053712 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0260910 ANTI-LOCK BRAKE SYSTEM D

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ANTI-LOCK BRAKE SYSTEM  DTC CHECK / CLEAR  


DTC CHECK/CLEAR (When Using Intelligent Tester)


a.

Check for DTCs.

i.

Turn the ignition switch off.


ii.

Connect the intelligent tester to the DLC3.


iii.

Turn the ignition switch to ON.


iv.

Turn the intelligent tester on.


v.

Enter the following menus: Chassis / ABS/VSC/TRC / DTC.


vi.

Check the details of the DTCs (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ANTI-LOCK BRAKE SYSTEM>DIAGNOSTIC TROUBLE CODE CHART).

HINT:

Refer to the intelligent tester operator's manual for further details.




b.

Clear the DTCs.

i.

Turn the ignition switch off.


ii.

Connect the intelligent tester to the DLC3.


iii.

Turn the ignition switch to ON.


iv.

Turn the intelligent tester on.


v.

Enter the following menus: Chassis / ABS/VSC/TRC / DTC.


vi.

Clear the DTCs by following the prompts on the intelligent tester.

HINT:

Refer to the intelligent tester operator's manual for further details.





DTC CHECK/CLEAR (When Using SST Check Wire)


a.
U115769E01
0.108,0.087 0.413,0.237 0.304,0.151 10 *a 2.137,0.207 2.441,0.358 0.304,0.151 10 CG 2.205,1.943 2.510,2.094 0.304,0.151 10 TC 1.84,1.465 2.039,2.009 2.039,2.009 2.172,2.009 false

Check for DTCs.

Text in Illustration
*a Front view of DLC3

i.

Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

SST
09843-18040  


ii.

Turn the ignition switch to ON.


iii.

Read the DTCs output from the ABS warning light in the combination meter.

HINT:
·

When the system is normal, the ABS warning light blinks at 0.25 second intervals (0.25 seconds on and 0.25 seconds off).

·

When only 1 DTC is output, the light outputs the same code after an interval of 4 seconds. Example: when DTC 21 is output, the light blinks twice, turns off for 1.5 seconds, blinks once, turns off for 4 seconds, and then repeats this output pattern.

·

When 2 or more DTCs are output, the light outputs the codes with an interval of 2.5 seconds between each different code, and the output of all codes repeats after an interval of 4 seconds.

·

If no code is output, inspect the TC and CG terminal circuit and ABS warning light circuit.


Trouble Area See Procedure
TC and CG terminal circuit (Click here)
ABS warning light circuit (Remains on) (Click here)
ABS warning light circuit (Does not come on) (Click here)



iv.

Codes are explained in the DTC chart.

ABS DTC
ABS Warning Light Display Intelligent Tester Display
11 C0278
12 C0279
13 C0273
14 C0274
21 C0226
22 C0236
23 C0246
24 C0256
25 C1225
31 C1401
C1405
C1409
32 C1402
C1406
C1410
33 C1403
C1407
C1411
34 C1404
C1408
C1412
35 C1413
36 C1414
37 C1337
38 C1415
39 C1416
41 C1241
C1417
43 C1243
44 C1419
C1420
C1442
45 C1245
46 C1421
C1422
C1423
C1424
49 C1425
C1426
51 C1427
C1428
59 C1203
67 C1429
C1430
C1431
68 C1268
91 C1361
94 U0073
95 U0124
97 C1381
A1* U0114

*: The light blinks 10 times, turns off for 1.5 seconds, and then blinks once.



v.

Disconnect terminals 13 (TC) and 4 (CG) of the DLC3.

HINT:

If 2 or more DTCs are output at the same time, the DTCs are output in ascending order.




b.

Clear the DTCs.

i.
U115769E01
0.108,0.087 0.413,0.237 0.304,0.151 10 *a 2.137,0.207 2.441,0.358 0.304,0.151 10 CG 2.205,1.943 2.510,2.094 0.304,0.151 10 TC 1.84,1.465 2.039,2.009 2.039,2.009 2.172,2.009 false

Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

Text in Illustration
*a Front view of DLC3

SST
09843-18040  


ii.

Turn the ignition switch to ON.


iii.

Clear the DTCs stored in the ECU by depressing the brake pedal 8 times or more within 5 seconds.


iv.

Check that the ABS warning light blinks at 0.25 second intervals (0.25 seconds on and 0.25 seconds off).


v.

Remove SST from the terminals of the DLC3.




END OF DTC CHECK/CLEAR


a.

Turn the ignition switch to ON.


b.

Check that the ABS warning light goes off within approximately 3 seconds after turning the ignition switch to ON.