Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM PUMP (for 1GD-FTV)
RM27T0E _54 Brake _053713 BRAKE SYSTEM (OTHER) _0260935 VACUUM PUMP(for 1GD-FTV) A

BRAKE SYSTEM (OTHER)  VACUUM PUMP(for 1GD-FTV)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL VACUUM PUMP UNION

a.
C331081

Install the 2 new gaskets and the vacuum pump union with the union bolt.

Torque:
14 N*m (140 kgf*cm, 10 ft.*lbf)

HINT:

Check that the stopper of the vacuum pump union with union is securely held on the vacuum pump assembly.



Hide 29300 3.INSTALL VACUUM PUMP ASSEMBLY

a.

When using new vacuum pump assembly:

i.
C331082

Apply engine oil to the No. 2 and No. 3 O-rings installed in a new vacuum pump assembly.

Text in Illustration
V100135

Engine oil



b.

When reusing vacuum pump assembly:

i.

Install a new No. 2 and No. 3 O-rings to the vacuum pump assembly.


ii.
C331082

Apply engine oil to the No. 2 and No. 3 O-rings installed in a new vacuum pump assembly.

Text in Illustration
V100135

Engine oil



c.
A343514

Install the vacuum pump assembly so that the oil pipe engages with the hole of the camshaft and the coupling teeth with the grooves on the camshaft tip.

NOTICE:
·

Ensure that the vacuum pump assembly is installed securely.

·

Be careful not to pinch the O-ring.




d.

Install the vacuum pump assembly with the 3 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)

NOTICE:

After installation, check that there are no gaps between the matching surfaces and that the vacuum pump assembly is not installed at an angle.



Hide 25761B 4.CONNECT NO. 1 VACUUM TRANSMITTING HOSE

a.

Connect the No. 1 vacuum transmitting hose to the vacuum pump assembly.