The vacuum pump assembly is listed as one of the 200000 km (124000 mile) maintenance parts. Make sure to disassemble and inspect it every 200000 km (124000 mile) and replace parts as necessary.
1.REMOVE ENGINE ASSEMBLY
2.INSTALL ENGINE ASSEMBLY TO ENGINE STAND
25761B
3.DISCONNECT NO. 1 VACUUM TRANSMITTING HOSE
Disconnect the No. 1 vacuum transmitting hose from the vacuum pump assembly.
29300
4.REMOVE VACUUM PUMP ASSEMBLY
Remove the 3 bolts and vacuum pump assembly from the engine assembly.
Remove the No. 2 and No. 3 O-rings from the vacuum pump assembly.
11382C
5.REMOVE CAMSHAFT OIL SEAL RETAINER
6.REMOVE VACUUM PUMP UNION
Mount the vacuum pump assembly in a vise.
Place aluminum plates on the vise to prevent damage to the vacuum pump assembly.
Remove the union bolt, vacuum pump union and 2 gaskets from the vacuum pump assembly.