Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION).
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
73900
1.REMOVE NO. 1 INSTRUMENT LOWER PANEL AIRBAG ASSEMBLY
89227
2.REMOVE MULTIPLEX TILT AND TELESCOPIC ECU
Detach the wire harness clamp.
Disconnect the 2 connectors.
Remove the bolt and ECU.