When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
Enter the "Vehicle Signal Check Mode" screen. [Refer to Check Vehicle Signal in Operation Check (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM (for Radio and Display Type)>OPERATION CHECK)]
Check that the display for "TAIL" changes between ON and OFF according to the headlight dimmer switch assembly operation.
| Headlight Dimmer Switch Assembly | Display |
|---|---|
| Tail or head | ON |
| Off | OFF |
This display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.
Check that the display for "ADIM/TCAN" changes between DIM and BRIGHT according to the headlight dimmer switch assembly operation.
| Headlight Dimmer Switch Assembly | Display |
|---|---|
| Tail or head | DIM |
| Off | BRIGHT |
OK
(See pageAudio / Visual / Telematics>AUDIO / VIDEO>RADIO RECEIVER (for Radio and Display Type)>REMOVAL)
NG