When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
Check for foreign matter on the display.
The display is clean.
OK
NG
Enter the "Touch Switch Check" screen. [Refer to Check Touch Switch in Operation Check (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM (for Radio and Display Type)>OPERATION CHECK)]
Touch the display in the area where the switch malfunction occurs.
A "+" mark appears at the touched position.
OK
(See pageAudio / Visual / Telematics>AUDIO / VIDEO>RADIO RECEIVER (for Radio and Display Type)>REMOVAL)
NG