Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type) › 2015.06–2020.08
RM27T0E _56 Audio / Visual / Telematics _053720 AUDIO / VIDEO _0260969 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  Disc cannot be Inserted or is Ejected Right After Insertion  


CAUTION / NOTICE / HINT

HINT:

When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).


PROCEDURE

1.CHECK IF A PROPER DISC IS INSERTED
a.

Make sure that the CD is an audio disc or a disc with MP3, WMA or ACC files, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.

OK:

Disc is normal.


HINT:
·

Translucent or uniquely-shaped CDs cannot be played.

·

CDs and DVDs with adhesive paper labels should not be played.

·

Commercial audio CDs and DVDs can be played.

·

CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.

·

MP3, WMA and AAC files on CD-ROMs, CD-Rs and CD-RWs can be played.

·

For details on playable CDs and DVDs, refer to the Owner's Manual.





OK

2.CHECK THAT DISC IS INSERTED PROPERLY

NG

CHANGE DISC

2.CHECK THAT DISC IS INSERTED PROPERLY
a.

Check whether or not the disc is inserted upside down.

OK:

The disc is properly inserted.




OK

3.CLEAN DISC AND RECHECK

NG

INSERT DISC PROPERLY

3.CLEAN DISC AND RECHECK
a.
I100151

Clean the disc by wiping it clean with a soft cloth from the inside to the outside in a radial direction.

OK:

Malfunction disappears.


NOTICE:

Do not use a conventional record cleaner or anti-static preservative.




OK

END (DISC IS DIRTY)

NG

4.REPLACE DISC AND RECHECK
4.REPLACE DISC AND RECHECK
a.

Replace the disc with a known good one and check that the malfunction disappears.

OK:

The malfunction disappears.




OK

END (DISC IS DEFECTIVE)

NG