Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type) › 2015.06–2020.08
RM27T0E _56 Audio / Visual / Telematics _053720 AUDIO / VIDEO _0260969 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  CD/DVD Sound Skips  


CAUTION / NOTICE / HINT

HINT:

When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).


PROCEDURE

1.CHECK DISC
a.
I100152

Check that the disc is not deformed or cracked.

OK:

No deformation or cracks on the disc




OK

2.CHECK DISC

NG

CHANGE DISC

2.CHECK DISC
a.
I100151

Check the disc.

OK:

The disc is clean.


HINT:

If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.


NOTICE:

Do not use a conventional record cleaner or anti-static preservative.




OK

3.CHECK OPERATION

NG

CLEAN DISC

3.CHECK OPERATION
a.

Check if the problem recurs using another disc.

OK:

The problem does not occur.




OK

END (DISC IS DEFECTIVE)

NG

4.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
4.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
a.

Check that the radio and display receiver assembly is properly installed (See page Audio / Visual / Telematics>AUDIO / VIDEO>RADIO RECEIVER (for Radio and Display Type)>INSTALLATION).

OK:

Radio and display receiver assembly is properly installed.




OK

NG

REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY PROPERLY