These DTCs are stored when a malfunction occurs in the radio and display receiver assembly.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B1550 | Digital radio tuner has a malfunction | Radio and display receiver assembly |
| B15A0 | When either of the conditions below is met:
·
Bus malfunction ·
EEPROM error |
|
| B15B0 | Picture circuit (TFT unit) malfunction | |
| B15B3 | When one of the conditions below is met:
·
AM tuner PLL is unlocked ·
FM tuner PLL is unlocked ·
Tuner malfunction |
|
| B15B4 | When one of the conditions below is met:
·
Mechanical communication error. ·
Lead malfunction. ·
Mechanical malfunction. |
|
| B15B5 | When one of the conditions below is met:
·
Mechanical communication error. ·
Lead malfunction. ·
Mechanical malfunction. |
|
| B15B7 | "Bluetooth" module malfunction. |
When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
Check for DTCs (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM (for Radio and Display Type)>DTC CHECK / CLEAR).
No DTCs are output.
OK
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
NG
(See pageAudio / Visual / Telematics>AUDIO / VIDEO>RADIO RECEIVER (for Radio and Display Type)>REMOVAL)