Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
86160
1.INSTALL FRONT NO. 1 SPEAKER ASSEMBLY
Temporarily install the speaker by attaching the 2 claws of the speaker to the door panel.
Install the speaker with the 4 screws in the order shown in the illustration.
Connect the speaker connector.
Do not touch the cone of the speaker.
68172A
2.INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP LH
67602
3.INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
74611C
4.INSTALL ASSIST GRIP COVER LH
69298A
5.INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH
67492A
6.INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH
7.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).