Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
86160J
1.INSTALL FRONT NO. 3 SPEAKER ASSEMBLY
Attach the clip and claw to install the front No. 3 speaker.
Connect the connector.
62212
2.INSTALL FRONT PILLAR GARNISH LH
74611F
3.INSTALL NO. 1 ASSIST GRIP
74616C
4.INSTALL FRONT NO. 1 ASSIST GRIP PLUG LH
5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).