86011R
1.INSTALL RADIO SETTING CONDENSER
Attach the clamp to temporarily install the radio setting condenser with wire harness to the back door.
Install the radio setting condenser with the bolt.
Attach the 8 claws to install the terminal cover with wire harness to the condenser.
64780A
2.INSTALL BACK DOOR TRIM PANEL ASSEMBLY
69783B
3.INSTALL BACK DOOR INSIDE HANDLE BEZEL (for Face to Face Seat Type)
64798
4.INSTALL BACK DOOR LOCK COVER (w/o Back Door Tire Carrier)
09120A
5.INSTALL TOOL CASE
75202B
6.INSTALL UPPER TOOL BOX PANEL SUB-ASSEMBLY
67761A
7.INSTALL BACK DOOR TRIM COVER
67937B
8.INSTALL BACK DOOR SIDE GARNISH RH
67938A
9.INSTALL BACK DOOR SIDE GARNISH LH
67939B
10.INSTALL BACK DOOR CENTER GARNISH