Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION RECEIVER › 2015.06–2017.08
RM27T0E _56 Audio / Visual / Telematics _053721 NAVIGATION / MULTI INFO DISPLAY _0260988 NAVIGATION RECEIVER A

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION RECEIVER  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 84010A 3.REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY

Hide 86120L 4.REMOVE NAVIGATION RECEIVER ASSEMBLY

a.
B358810

Remove the 4 bolts.


b.
B358814

Pull the navigation receiver assembly to detach the 7 clips on the backside of the navigation receiver assembly.


c.

Disconnect each connector and remove the navigation receiver assembly.


Hide 84330 5.REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY

Hide C8215 6.REMOVE HAZARD SWITCH WIRE

a.
B358813

Detach the clamp and remove the hazard switch wire.


Hide 86211J 7.REMOVE NO. 1 RADIO RECEIVER BRACKET

a.
B358811

Remove the 3 screws and No. 1 radio receiver bracket.


Hide 86212C 8.REMOVE NO. 2 RADIO RECEIVER BRACKET

a.
B358812

Remove the 3 screws and No. 2 radio receiver bracket.


Hide 55670 9.REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

a.
B358815

Detach the 7 claws, 2 guides and remove the No. 3 instrument panel register assembly.