Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
86860
1.INSTALL NAVIGATION ANTENNA ASSEMBLY
Install the navigation antenna assembly with the 2 screws in the order shown in the illustration.
Attach the clamp.
55950G
2.INSTALL DEFROSTER NOZZLE ASSEMBLY
55972C
3.INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT
55971C
4.INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT
55844
5.INSTALL NO. 2 HEATER TO REGISTER DUCT
55843A
6.INSTALL NO. 1 HEATER TO REGISTER DUCT
55401E
7.INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
9.CHECK SRS WARNING LIGHT