Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Navigation Receiver Type) › 2015.06–2017.08
RM27T0E _56 Audio / Visual / Telematics _053721 NAVIGATION / MULTI INFO DISPLAY _0260991 NAVIGATION SYSTEM(for Navigation Receiver Type) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Navigation Receiver Type)  AVC-LAN Circuit  


DESCRIPTION

Each navigation system component connected to the AVC-LAN (communication bus) transfers switch signals using the audio visual communication local area network.

If a short to +B or short to ground occurs in the AVC-LAN, the audio system will not function normally because communication is not possible.

WIRING DIAGRAM

E346108E01
5.917,0.302 6.531,0.5 0.615,0.198 10 false TX1+ 5.917,0.698 6.531,0.896 0.615,0.198 10 false TX1- 5.917,1.719 6.531,1.917 0.615,0.198 10 false TX+ 5.917,2.135 6.531,2.333 0.615,0.198 10 false TX- 5.917,3.167 6.531,3.365 0.615,0.198 10 false TX3+ 5.917,3.552 6.531,3.75 0.615,0.198 10 false TX3- 5.708,3.969 6.948,4.385 1.24,0.417 10 false Navigation Receiver Assembly 5.521,0.302 6.135,0.5 0.615,0.198 10 false H56 5.594,0.094 6.208,0.292 0.615,0.198 10 false 7 5.51,0.698 6.125,0.896 0.615,0.198 10 false H56 5.594,0.51 6.208,0.708 0.615,0.198 10 false 8 5.521,1.74 6.135,1.938 0.615,0.198 10 false H57 5.594,1.542 6.208,1.74 0.615,0.198 10 false 9 5.521,2.135 6.135,2.333 0.615,0.198 10 false H57 5.552,1.938 6.167,2.135 0.615,0.198 10 false 10 5.521,3.177 6.135,3.375 0.615,0.198 10 false H55 5.604,2.979 6.219,3.177 0.615,0.198 10 false 7 5.521,3.573 6.135,3.771 0.615,0.198 10 false H55 5.594,3.375 6.208,3.573 0.615,0.198 10 false 8 3.917,0.167 4.531,0.365 0.615,0.198 10 false 8 3.927,0.552 4.542,0.75 0.615,0.198 10 false 7 3.927,1.604 4.542,1.802 0.615,0.198 10 false 3 3.917,2 4.531,2.198 0.615,0.198 10 false 4 3.917,3.042 4.531,3.24 0.615,0.198 10 false 11 3.917,3.448 4.531,3.646 0.615,0.198 10 false 10 3.531,0.281 4.146,0.479 0.615,0.198 10 false TX+ 3.563,0.688 4.177,0.885 0.615,0.198 10 false TX- 3.469,1.729 4.083,1.927 0.615,0.198 10 false TX1+ 3.5,2.135 4.115,2.333 0.615,0.198 10 false TX1- 3.552,3.167 4.167,3.365 0.615,0.198 10 false TX+ 3.563,3.563 4.177,3.76 0.615,0.198 10 false TX- 1.51,0.198 2.125,0.396 0.615,0.198 10 false H63 1.5,0.365 2.76,0.75 1.26,0.385 10 false Stereo Component Amplifier Assembly 1.667,1.635 2.281,1.833 0.615,0.198 10 false W14 1.667,1.813 2.833,2.313 1.167,0.5 10 false Television Display Assembly 1.344,1.417 1.958,1.615 0.615,0.198 10 false *1 1.333,2.833 1.948,3.031 0.615,0.198 10 false *2 1.813,3.135 2.427,3.333 0.615,0.198 10 false I6 1.781,3.292 2.781,3.75 1,0.458 10 false Parking Assist ECU 0.052,3.219 1.5,3.667 1.448,0.448 10 false *1: w/ Rear Seat Entertainment System 0.052,3.833 1.25,4.167 1.198,0.333 10 false *2: w/ Side Monitor System 0.99,4.344 3.271,4.677 2.281,0.333 10 false : AVC-LAN Communication Line

CAUTION / NOTICE / HINT

HINT:
·

The navigation receiver assembly is the master unit.

·

When replacing the navigation receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).



PROCEDURE

1.INSPECT NAVIGATION RECEIVER ASSEMBLY
a.

Remove the navigation receiver assembly (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION RECEIVER>REMOVAL).

E284331E05
3.031,0.292 3.229,0.292 3.229,0.292 3.385,0.875 false 3.844,0.292 3.646,0.292 3.646,0.292 3.49,0.875 false 5.448,0.292 5.656,0.292 5.656,0.292 5.813,0.865 false 6.271,0.292 6.073,0.292 6.073,0.292 5.917,0.865 false 0.938,1.479 1.146,1.479 1.146,1.479 1.292,1.115 false 1.76,1.479 1.552,1.479 1.552,1.479 1.406,1.115 false 0.052,0.01 0.448,0.188 0.396,0.177 10 false *a 2.542,0.219 3.031,0.396 0.49,0.177 10 false TX3-*B 3.865,0.219 4.385,0.396 0.521,0.177 10 false TX3+*B 5.135,0.219 5.49,0.396 0.354,0.177 10 false TX1- 6.292,0.219 6.813,0.396 0.521,0.177 10 false TX1+ 0.531,1.396 0.948,1.573 0.417,0.177 10 false TX-*A 1.781,1.396 2.302,1.573 0.521,0.177 10 false TX+*A

Text in Illustration
*A w/ Rear Seat Entertainment System *B w/ Multi-terrain Monitor
*a Component without harness connected
(Navigation Receiver Assembly)
- -


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
7 (TX1+) - 8 (TX1-) Always 60 to 80 Ω
9 (TX+) - 10 (TX-)*1 Always 60 to 80 Ω
7 (TX3+) - 8 (TX3-)*2 Always 60 to 80 Ω


*1: w/ Rear Seat Entertainment System

*2: w/ Side Monitor System




OK

2.CHECK HARNESS AND CONNECTOR (AVC-LAN CIRCUIT)

NG

2.CHECK HARNESS AND CONNECTOR (AVC-LAN CIRCUIT)

*1: w/ Rear Seat Entertainment System

*2: w/ Side Monitor System


a.

Disconnect the H55, H56 and H57 navigation receiver assembly connectors.


b.

Disconnect the H63 stereo component amplifier assembly connector.


c.

Disconnect the W14 television display assembly connector*1.


d.

Disconnect the I6 parking assist ECU connector*2.


e.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
H55-7 (TX3+) - I6-11 (TX+)*2 Always Below 1 Ω
H55-8 (TX3-) - I6-10 (TX-)*2 Always Below 1 Ω
H56-7 (TX1+) - H63-8 (TX+) Always Below 1 Ω
H56-8 (TX1-) - H63-7 (TX-) Always Below 1 Ω
H57-9 (TX+) - W14-3 (TX1+)*1 Always Below 1 Ω
H57-10 (TX-) - W14-4 (TX1-)*1 Always Below 1 Ω
H55-7 (TX3+) - Body ground*2 Always 10 kΩ or higher
H55-8 (TX3-) - Body ground*2 Always 10 kΩ or higher
H56-7 (TX1+) - Body ground Always 10 kΩ or higher
H56-8 (TX1-) - Body ground Always 10 kΩ or higher
H57-9 (TX+) - Body ground*1 Always 10 kΩ or higher
H57-10 (TX-) - Body ground*1 Always 10 kΩ or higher




OK

3.INSPECT MALFUNCTIONING PARTS

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.INSPECT MALFUNCTIONING PARTS
a.

Disconnect and reconnect each slave unit one by one until the master unit returns to normal operation.

HINT:
·

Check all slave units.

·

When disconnecting a slave unit causes the master unit to return to normal operation, this indicates that the slave unit is malfunctioning. Replace the malfunctioning slave unit.



OK:

Master unit returns to normal operation.




OK

REPLACE MALFUNCTIONING PARTS

NG