The navigation receiver assembly stores this DTC when the SD card cannot be mounted when inserted into the SD card slot.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B158C | The SD card cannot be mounted when inserted into the SD card slot. | ·
SD card ·
Navigation receiver assembly |
When replacing the navigation receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
Turn the engine switch off and remove the SD card from the SD card slot.
Check that the SD card is not damaged.
The SD card is not damaged.
OK
NG
Check that the terminals of the SD card are free of foreign matter. Remove foreign matter as necessary.
Check that the SD card slot of the navigation receiver assembly is free of foreign matter. Remove foreign matter as necessary.
Insert the SD card into the SD card slot.
NEXT
Recheck for DTCs and check that no DTCs are output (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM (for Navigation Receiver Type)>DTC CHECK / CLEAR).
No DTCs are output.
OK
NG
Replace the SD card.
Recheck for DTCs and check that no DTCs are output (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM (for Navigation Receiver Type)>DTC CHECK / CLEAR).
No DTCs are output.
OK
NG