Avoid any impact to the blind spot monitor sensor.
Do not drop the blind spot monitor sensor. If it is dropped, replace it with a new one.
51980
1.REMOVE PINTLE HOOK ASSEMBLY (w/ Pintle Hook)
58766A
2.REMOVE JACK BOX HOLE COVER
52179B
3.REMOVE REAR BUMPER BAR PLATE
69411
4.REMOVE BACK DOOR CHECK
52162B
5.REMOVE NO. 1 REAR BUMPER PLATE
76626E
6.REMOVE REAR QUARTER PANEL MUDGUARD LH
76625G
7.REMOVE REAR QUARTER PANEL MUDGUARD RH
Use the same procedure described for the LH side.
52159
8.REMOVE REAR BUMPER COVER
88172
9.REMOVE BLIND SPOT MONITOR SENSOR LH
Disconnect the connector.
Remove the 3 nuts and blind spot monitor sensor LH.
88162
10.REMOVE BLIND SPOT MONITOR SENSOR RH
Disconnect the connector.
Remove the 3 nuts and blind spot monitor sensor RH.