Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › SIDE MONITOR SYSTEM › 2015.06–2017.08
RM27T0E _56 Audio / Visual / Telematics _053722 PARK ASSIST / MONITORING _0261013 SIDE MONITOR SYSTEM D

PARK ASSIST / MONITORING  SIDE MONITOR SYSTEM  INITIALIZATION  


INITIALIZE SIDE MONITOR SYSTEM


a.

When "System initializing" is displayed on the multi-display assembly, correct the steering angle neutral point using the following method.

i.

Fully turn the steering wheel to the right and left on the flat ground.

NOTICE:

Memorizing the steering angle neutral point must be carried out with the engine started. Apply the parking brake, depress the brake pedal, move the shift lever to P and make sure that the vehicle is not moving.


HINT:
·

The "?" button is displayed at the same time as "System initializing". If the "?" button is selected, this method is displayed.

·

If the steering angle neutral point cannot be memorized by fully turning the steering wheel to the right and left, perform Steering Angle Setting in Calibration (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>SIDE MONITOR SYSTEM>CALIBRATION).