Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84052
1.INSTALL UNLOCK WARNING SWITCH ASSEMBLY
If reusing the unlock warning switch assembly:
Install the unlock warning switch.
| *1 | Pin Cap |
|
Slide |
Install the pin cap.
Connect the unlock warning switch connector.
Attach the 3 claws to install the cover.
If replacing the unlock warning switch assembly:
| *1 | Pin |
|
Slide |
While pushing the pin, slide the switch to install the warning switch.
Connect the unlock warning switch connector.
84650
2.INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
45286B
3.INSTALL UPPER STEERING COLUMN COVER
45287
4.INSTALL LOWER STEERING COLUMN COVER