Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
55318C
1.REMOVE INSTRUMENT SIDE PANEL LH
55471A
2.REMOVE INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)
55476C
3.REMOVE INSTRUMENT PANEL FINISH PLATE GARNISH (for RHD)
55480D
4.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
55404D
5.REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
45287
6.REMOVE LOWER STEERING COLUMN COVER
45286B
7.REMOVE UPPER STEERING COLUMN COVER
89783
8.REMOVE TRANSPONDER KEY AMPLIFIER
Remove the screw and cover.
Turn the key amplifier as shown in the illustration to detach the 2 claws and remove the key amplifier.
Disconnect the connector.