Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
73960A
1.INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY
Attach the 5 hooks (A).
| *a | Hook A |
| *b | Hook B |
Attach the 5 hooks (B) to install the instrument panel passenger airbag.
Install the 2 screws.
82142A
2.INSTALL NO. 2 INSTRUMENT PANEL WIRE
Attach the clamp to install the wire.
Connect the connector.
When handling the airbag connector, take care not to damage the airbag wire harness.
55401E
3.INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
Install the instrument panel safety pad sub-assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>INSTALLATION).