Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › SIDE AIRBAG SENSOR
RM27T0E _58 Vehicle Interior _053735 SUPPLEMENTAL RESTRAINT SYSTEMS _0261091 SIDE AIRBAG SENSOR G

SUPPLEMENTAL RESTRAINT SYSTEMS  SIDE AIRBAG SENSOR  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 89860A 1.CHECK SIDE AIRBAG SENSOR ASSEMBLY LH (VEHICLE NOT INVOLVED IN COLLISION)

Hide 89860A 2.CHECK SIDE AIRBAG SENSOR ASSEMBLY LH (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)


b.

When the center pillar of the vehicle or the surrounding area is damaged, check if there is any damage to the side airbag sensor. If there are any defects as mentioned below, replace the side airbag sensor with a new one:

·

Cracks, dents or chips on the sensor housing.

·

Cracks or other damage to the connector.

·

Peeling of the label or damage to the serial number.


CAUTION:

For removal and installation of the side airbag sensor, be sure to follow the correct procedure.



Hide 89860A 3.CHECK SIDE AIRBAG SENSOR ASSEMBLY LH (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS DEPLOYED)

a.

When airbags have deployed as the result of a collision, be certain to replace all side airbag sensors in the damaged area (anywhere in need of repair).

Furthermore, it is also necessary to replace any side airbag sensors in undamaged areas that have registered a major collision, or which exhibit any of the following abnormalities:

·

Cracks, dents or chips on the sensor housing.

·

Cracks or other damage to the connector.

·

Peeling of the label or damage to the serial number.


CAUTION:

For removal and installation of the side airbag sensor, be sure to follow the correct procedure.