Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
83950
1.INSTALL TELLTALE LIGHT ASSEMBLY
Install the light with the 2 screws.
55435A
2.INSTALL INSTRUMENT PANEL FINISH PANEL END RH
55448A
3.INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION
4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
5.CHECK SRS WARNING LIGHT
Check the SRS warning light (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DIAGNOSIS SYSTEM).