Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH SAFETY SYSTEM › 2015.06–2017.08
RM27T0E _58 Vehicle Interior _053736 PRE-CRASH SAFETY _0261101 PRE-CRASH SAFETY SYSTEM C

PRE-CRASH SAFETY  PRE-CRASH SAFETY SYSTEM  C1A0A  Front Radar Sensor Region Code Mismatch  


DESCRIPTION

The driving support ECU uses the millimeter wave radar sensor assembly to detect obstacles in front of the vehicle. Based on this information, the driving support ECU sends pre-crash control operation signals.

When the millimeter wave radar sensor is replaced with a new one, it acquires the country specification information from the driving support ECU. Also, when the driving support ECU is replaced with a new one, it receives country specification information from the main body ECU. When country specification information in the sensor and driving support ECU do not match, DTC C1A0A is output.

DTC Code DTC Detection Condition Trouble Area
C1A0A While the initial check is running, the ignition switch is ON and the pre-crash safety system is operating, the country specification information in the driving support ECU and millimeter wave radar sensor do not match for 1 second.
·

Millimeter wave radar sensor assembly

·

Driving support ECU



PROCEDURE

1.CHECK MILLIMETER WAVE RADAR SENSOR ASSEMBLY
a.

Change the millimeter wave radar sensor assembly to aiming adjustment mode (See page Engine / Hybrid System>CRUISE CONTROL>MILLIMETER WAVE RADAR SENSOR>ADJUSTMENT).

HINT:

Aiming adjustment does not need to the performed. When the millimeter wave radar sensor assembly is changed to aiming adjustment mode, specification information is acquired from the driving support ECU.




NEXT

2.CHECK FOR DTC
2.CHECK FOR DTC

OK

END

NG

3.REPLACE MILLIMETER WAVE RADAR SENSOR ASSEMBLY
3.REPLACE MILLIMETER WAVE RADAR SENSOR ASSEMBLY
a.

Replace the millimeter wave radar sensor assembly (See page Engine / Hybrid System>CRUISE CONTROL>MILLIMETER WAVE RADAR SENSOR>REMOVAL).



NEXT

4.ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY
4.ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY
a.

Adjust the millimeter wave radar sensor assembly (See page Engine / Hybrid System>CRUISE CONTROL>MILLIMETER WAVE RADAR SENSOR>ADJUSTMENT).



NEXT

5.CHECK FOR DTC
5.CHECK FOR DTC

OK

END (MILLIMETER WAVE RADAR SENSOR ASSEMBLY IS DEFECTIVE)

NG