Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY (for Power Seat Type LH Side) › 2015.06–2021.06
RM27T0E _58 Vehicle Interior _053737 SEAT _0261105 REAR NO. 2 SEAT ASSEMBLY(for Power Seat Type LH Side) A

SEAT  REAR NO. 2 SEAT ASSEMBLY(for Power Seat Type LH Side)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


NOTICE:
·

Under either of the following conditions, perform initialization (initial position memorization) of the fold seat control ECU (See page Vehicle Interior>SEAT>REAR POWER SEAT CONTROL SYSTEM>INITIALIZATION).

-

The fold seat control ECU is replaced with a new one.

-

Initialization (initial position reset) of the fold seat control ECU is performed.



·

Under any of the following conditions, perform initialization (initial position reset and initial position memorization) of the fold seat control ECU (See page Vehicle Interior>SEAT>REAR POWER SEAT CONTROL SYSTEM>INITIALIZATION).

-

The fold seat control ECU is exchanged with one from another vehicle.

-

The seatback frame and seat leg are inspected.

-

The seat is disassembled and the positions of the seatback and seat cushion change with respect to one another.

-

The seatback frame or seat leg is replaced.

-

The cable is disconnected from the battery while the seatback or seat cushion is operating.




HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 58410R 1.REMOVE DECK BOARD ASSEMBLY

a.

Operate the No. 2 fold seat switch and fold down the 2 seatbacks.


b.
B236495

Remove the 2 bolts.


c.

Detach the 4 clips and remove the deck board.


Hide 58418A 2.REMOVE REAR NO. 4 FLOOR BOARD

a.
B236502E01
3.21,1.377 3.361,1.519 0.151,0.142 10 *1 2.999,1.455 3.19,1.455 false 3.104,1.455 2.875,1.731 false

Using a moulding remover, detach the clip and 3 claws.

Text in Illustration
*1 Guide


b.

Detach the 2 guides and remove the floor board.


Hide 58417 3.REMOVE REAR NO. 3 FLOOR BOARD (w/o Rear Air Conditioning System)

a.
B239971E01
0.079,1.029 0.239,1.171 0.161,0.142 10 *1 0.165,1.188 0.165,1.274 0.165,1.274 0.442,1.274 false 1.26,1.562 1.421,1.704 0.161,0.142 10 *1 0.764,1.651 1.242,1.651 false

Using a moulding remover, detach the clip and 4 claws.

Text in Illustration
*1 Guide


b.

Detach the 2 guides and remove the floor board.


Hide 58417 4.REMOVE REAR NO. 3 FLOOR BOARD (w/ Rear Air Conditioning System)

a.
B236503E01
0.318,1.469 0.467,1.612 0.149,0.143 10 *1 0.682,1.414 0.682,1.549 0.682,1.549 0.48,1.549 false 0.682,1.549 0.79,1.549 false

Using a moulding remover, detach the clip and 3 claws.

Text in Illustration
*1 Guide


b.

Detach the 2 guides and remove the floor board.


Hide 58574A 5.REMOVE REAR FLOOR MAT SUPPORT PLATE

a.

Remove the 3 bolts.

B236501E01
2.1,2.519 2.262,2.675 0.163,0.156 10 *1 1.914,2.085 1.914,2.589 1.914,2.589 2.068,2.589 false 5.658,2.519 5.821,2.675 0.163,0.156 10 *1 5.466,1.371 5.466,2.589 5.466,2.589 5.62,2.589 false

Text in Illustration
*1 Guide - -


b.

Detach the 4 claws and 2 guides.


c.

Detach the 5 clips and remove the support plate.


Hide 58439D 6.REMOVE DECK BOARD BRACKET REINFORCEMENT

a.
B236496E01
0.719,1.053 0.872,1.198 0.152,0.145 10 *1 0.526,1.55 0.526,1.137 0.526,1.137 0.706,1.137 false 2.266,0.761 2.419,0.906 0.152,0.145 10 *1 2.437,0.842 2.97,0.842 2.97,0.842 2.97,0.971 false

Remove the 2 bolts.

Text in Illustration
*1 Hook


b.

Detach the 2 hooks and reinforcement.


Hide 58417D 7.REMOVE NO. 1 DECK BOARD BRACKET LH

a.
B236497

Remove the 2 bolts and bracket.


Hide 8.REMOVE REAR NO. 2 SEAT ASSEMBLY LH

a.

Operate the No. 2 fold seat switch and raise the 2 seatbacks.


b.
B236504

Disconnect the connector.


c.
B236506

Remove the 2 bolts.


d.
B238648E03
0.542,1.458 0.344,1.458 false 0.479,1.698 0.271,2.49 false 2.885,1.427 2.708,1.552 2.708,1.552 2.563,1.552 false 2.958,1.198 2.75,1.198 false 0.188,2.51 0.344,2.656 0.156,0.146 10 false *2 0.177,1.365 0.344,1.573 0.167,0.208 10 true *1 2.375,1.458 2.531,1.604 0.156,0.146 10 false *2 2.583,1.115 2.75,1.302 0.167,0.188 10 true *1

Using a screwdriver, detach the 2 guides and 6 claws and open the 2 covers.

HINT:

Tape the screwdriver tip before use.


Text in Illustration
*1 Protective Tape
*2 Guide


e.
B236494

Remove the 2 bolts.


f.
B236507

Remove the rear No. 2 seat assembly from the vehicle.

NOTICE:

Be careful not to damage the vehicle body.


HINT:

If removing the seat on the RH side with the LH side installed, remove it with the No. 3 rear seat leg cover LH raised as shown in the illustration.