Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84920
1.INSTALL LUMBAR SWITCH ASSEMBLY
Install the switch with the 2 screws.
71812D
2.INSTALL FRONT SEAT CUSHION SHIELD LH
72495
3.INSTALL VERTICAL ADJUSTING HANDLE LH
72526
4.INSTALL RECLINING ADJUSTER RELEASE HANDLE LH
5.INSTALL FRONT SEAT ASSEMBLY
Install the front seat assembly (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>INSTALLATION).