Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side) › 2015.06–2021.06
RM27T0E _58 Vehicle Interior _053737 SEAT _0261128 REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side)  REASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:

A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).


PROCEDURE

Hide 78920B 1.INSTALL NO. 1 FOLD SEAT LOCK CONTROL CABLE ASSEMBLY LH

a.

Install the cable to the seat cushion frame.


b.

Attach the 3 cable clamps and connect the cable.


c.

Install 2 new cable ties.


Hide 73709A 2.INSTALL TETHER ANCHOR BRACKET SUB-ASSEMBLY

a.

Install the bracket with the bolt.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


Hide 72720B 3.INSTALL REAR SEATBACK INNER ADJUSTER ASSEMBLY LH

B241172E01
3.124,1.978 3.307,2.145 0.184,0.166 10 *1 3.081,2.069 2.982,2.069 false 2.982,2.069 2.685,2.715 false 2.948,2.842 3.131,3.008 0.184,0.166 10 *2 2.905,2.932 2.255,2.932 false

a.

Install the cover and adjuster with the 2 bolts.

Torque:
Bolt A : 65 N*m (663 kgf*cm, 48 ft.*lbf)
Bolt B : 50 N*m (510 kgf*cm, 37 ft.*lbf)

Text in Illustration
*1 Bolt A
*2 Bolt B


Hide 71018 4.INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY LH

a.

Install the seatback frame and bracket with the 4 bolts.

Torque:
50 N*m (510 kgf*cm, 37 ft.*lbf)


Hide 72830B 5.INSTALL REAR CENTER SEAT ARMREST BUSH

a.

Attach the 3 claws to install the bush.


Hide 72569 6.INSTALL SEATBACK STOPPER PLATE

a.

Install the plate with 3 bolts.


Hide 71878E 7.INSTALL REAR SEAT RECLINING COVER INNER RH

a.

Attach the 2 guides to install the cover.


Hide 71879E 8.INSTALL REAR SEAT RECLINING COVER INNER LH

a.

Attach the 2 guides to install the cover.


Hide 71879F 9.INSTALL REAR SEAT INNER RECLINING COVER LH

a.

Attach the 2 guides and 2 claws to install the cover.


Hide 72620B 10.INSTALL REAR NO. 1 SEAT LOCK CABLE ASSEMBLY

a.

Install the cable to the seatback frame.


b.

Attach the 2 cable clamps and connect the cable.


Hide 73187A 12.INSTALL REAR SEAT SHOULDER BELT GUIDE

a.

Attach the 4 guides to install the belt guide.


b.
B241167

Connect the outer belt to the belt guide.


c.

Attach the 2 claws to close the cover.


Hide 71812C 13.INSTALL RECLINING ADJUSTER COVER LH

B241135

a.

Attach the 4 claws to install the cover.


b.

Install the 4 screws.


Hide 71834H 14.INSTALL REAR NO. 1 SEAT RECLINING COVER LH

a.

Attach the 2 claws to install the cover.


Hide 71078S 15.INSTALL SEPARATE TYPE REAR SEATBACK COVER

a.

Install the seatback cover with 2 new hog rings and attach the fastening tape.


b.

Using hog ring pliers, install the new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, avoid wrinkling the cover.


B241131E01
6.417,0.27 6.630,0.438 0.213,0.169 10 *1 4.646,1.562 4.859,1.730 0.213,0.169 10 *2 6.394,0.344 6.31,0.344 false 6.31,0.344 6.073,1.137 false 4.624,1.629 4.516,1.629 false 4.516,1.629 4.412,1.202 false 4.516,1.629 3.521,0.624 false


Text in Illustration
*1 Hog Ring Pliers *2 Fastening Tape


Hide 16.INSTALL SEATBACK COVER WITH PAD

a.
B241128

Connect the outer belt to the seatback cover with pad.


b.

Attach the 2 hooks to install the seatback cover with pad.


Hide 71931B 17.INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

a.

Attach the 8 claws to install the 4 supports.


Hide 72058A 18.INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH

a.
B165026E05
1.688,2.948 1.917,3.115 0.229,0.167 10 false (1) 0.354,0.823 0.646,1.01 0.292,0.188 10 false (3) 1.792,2.302 2.031,2.51 0.24,0.208 10 true (2)

Connect the cable in the order shown in the illustration to install the lever.


b.

Install the 2 screws.


Hide 72615C 19.INSTALL REAR SEATBACK LOCK STRIKER COVER

B237664

a.

Attach the guide and claw to install the cover.


Hide 73375B 20.INSTALL REAR SEAT SHOULDER BELT HOLE COVER LH

a.
B241126

Connect the outer belt to the cover.


b.
B241124

Attach the 4 claws to install the cover.


Hide 73237A 21.INSTALL SHOULDER BELT ANCHOR COVER

B241123

a.

Attach the 2 claws and 2 guides to install the cover.


Hide 71956C 22.INSTALL REAR SEAT ARMREST SUPPORT

a.

Install the armrest support to the armrest hinge.


Hide 71281A 23.INSTALL REAR SEAT CENTER ARMREST HINGE

a.

Install the armrest hinge with the screw.


Hide 72830 24.INSTALL REAR SEAT CENTER ARMREST ASSEMBLY

a.

Install the center armrest and bush with the 2 bolts.


Hide 71837D 25.INSTALL REAR SEAT INNER RECLINING COVER RH

B241118

a.

Attach the guide to install the cover.


b.

Install the screw.


Hide 79185 26.INSTALL NO. 1 SEATBACK PAD LH

a.

Install the seatback pad.


b.
B241115

Close the 2 fasteners, and then close the seatback cover.


c.
B242243E01
2.411,0.342 2.617,0.517 0.206,0.175 10 *1 2.413,0.445 2.279,0.445 false 2.279,0.445 1.85,1.664 false

Using hog ring pliers, install 6 new hog rings.

Text in Illustration
*1 Hog Ring Pliers


d.

Attach the 3 fastening tapes and close the cover.


e.
B241112E01
1.663,1.744 1.858,1.931 0.196,0.187 10 *1 1.771,1.737 1.443,1 false 1.944,0.991 1.771,1.737 false

Connect the outer belt with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the rear No. 1 seat outer belt to overlap the protruding parts of the seat cushion frame.


Text in Illustration
*1 Protruding Part


Hide 72996A 27.INSTALL REAR SEATBACK COVER

a.

Attach the 8 claws to install the 2 covers.


Hide 71076S 28.INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER

B241110E01
2.133,0.522 2.331,0.692 0.198,0.170 10 *1 2.099,0.62 2.01,0.62 false 2.01,0.62 1.746,1.713 false

a.

Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.

Text in Illustration
*1 Hog Ring Pliers

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, avoid wrinkling the cover.




Hide 71647F 29.INSTALL REAR SEAT INNER CUSHION EDGE PROTECTOR LH

a.

Install the protector with new tack pins.


Hide 30.INSTALL SEAT CUSHION COVER WITH PAD

B241108E01
2.223,0.326 2.431,0.493 0.208,0.166 10 *1 2.176,0.416 2.064,0.416 false 2.064,0.416 1.731,1.538 false

a.

Using hog ring pliers, install the seatback cover with pad with new hog rings.

Text in Illustration
*1 Hog Ring Pliers


b.

Install the carpet with new tack pins.


Hide 71585 33.INSTALL REAR NO. 2 SEAT HINGE COVER RH

a.

Attach the 3 claws to install the cover.


Hide 71586 34.INSTALL REAR NO. 2 SEAT HINGE COVER LH

a.

Attach the 3 claws to install the cover.


Hide 72908B 35.INSTALL REAR SEAT CUSHION UNDER COVER SUB-ASSEMBLY LH

a.

Temporarily install the under cover to the seat cushion frame.


Hide 72649 36.INSTALL REAR SEAT CUSHION SUPPORT SPRING

a.

Install the spring to the seat cushion frame

HINT:

Use the same procedure for both springs.



Hide 78917 37.INSTALL FOLD SEAT LEG LOCK CUSHION

B241087

a.

Install the cushion to the protector.

HINT:

Use the same procedure for both cushions.



Hide 71647G 38.INSTALL REAR SEAT CUSHION EDGE PROTECTOR

a.

Install the protector to the cushion frame.

HINT:

Use the same procedure for both protectors.



Hide 71301D 39.INSTALL REAR SEAT HINGE SUB-ASSEMBLY RH

a.

Install the hinge.


b.

Install the pin to the hinge.


c.

Install a new E-ring.


Hide 71305C 40.INSTALL REAR SEAT STAY SUB-ASSEMBLY

a.

Connect the seat stay ball-joint to the seat hinge.

HINT:

It is only necessary to perform this step when replacing the seat stay and seat hinge. After the seat stay is connected to the seat hinge, it cannot be disconnected.



Hide 71302D 41.INSTALL REAR SEAT HINGE SUB-ASSEMBLY LH

a.

Install the spring of the seat stay ball-joint.


b.

Temporarily install the seat hinge and seat stay as a unit.


c.

Raise the under cover.


d.
B241091

Connect the seat stay to the seat cushion frame.


e.
B241177

Connect the reclining release handle to the under cover.


f.

Install the 5 screws.


g.

Attach the 10 claws to install the under cover.


h.

Install the pin to the hinge.


i.

Install a new E-ring.


Hide 72779 42.INSTALL REAR SEAT HINGE PAWL GUIDE

a.

Attach the 4 claws to install the pawl guide.

HINT:

Use the same procedure for both pawl guides.



Hide 72205B 43.INSTALL SEAT TRACK OPEN LEVER PIN SUB-ASSEMBLY

B241081

a.

Install the pin as shown in the illustration.


b.

Install the stopper.

HINT:

Use the same procedure for both pins.



Hide 71876K 44.INSTALL REAR RECLINING ADJUSTER INSIDE COVER LH

a.

Attach the 2 claws to install the cover.


b.

Install the 2 screws.


Hide 71324G 45.INSTALL REAR NO. 2 SEAT CUSHION

a.

Install the cushion with the screw.


Hide 71833A 46.INSTALL REAR NO. 1 SEAT RECLINING COVER RH

a.

Attach the 2 hooks.


b.
B241101

Attach the guide and 2 claws to install the cover.


c.

Install the 2 screws.


Hide 71844D 47.INSTALL REAR SEAT RECLINING COVER LH

a.
B241079

Attach the guide and 2 claws to install the cover.


b.

Install the 2 screws.