Wear protective gloves. Sharp areas on the parts may injure your hands.
73320A
1.INSTALL NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH
When installing the retractor, make sure the claws of the vehicle (labeled "a" in the illustration) only contact the installation areas of the retractor.
Align the seat belt positioning holes with the claws and install the retractor of the 3 point type belt with the nut as shown in the illustration.
Install the belt sensor with the 3 nuts.
73187A
2.INSTALL REAR SEAT SHOULDER BELT GUIDE
71812C
3.INSTALL RECLINING ADJUSTER COVER LH
71878D
4.INSTALL REAR SEAT INNER RECLINING COVER RH
71078S
5.INSTALL SEPARATE TYPE REAR SEATBACK COVER
6.INSTALL SEATBACK COVER WITH PAD
71931B
7.INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY
72058A
8.INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH
72615C
9.INSTALL REAR SEATBACK LOCK STRIKER COVER
73375B
10.INSTALL REAR SEAT SHOULDER BELT HOLE COVER LH
73237A
11.INSTALL SHOULDER BELT ANCHOR COVER
71956C
12.INSTALL REAR SEAT ARMREST SUPPORT
71281A
13.INSTALL REAR CENTER SEAT ARMREST HINGE
72830
14.INSTALL REAR SEAT CENTER ARMREST ASSEMBLY
71837D
15.INSTALL REAR SEAT INNER RECLINING COVER RH
79185
16.INSTALL NO. 1 SEATBACK PAD LH
72996A
17.INSTALL REAR SEATBACK COVER
73320A
18.CONNECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH
Connect the belt with the bolt.
Do not allow the anchor part of the rear No. 1 seat outer belt to overlap the protruding parts of the seat cushion frame.
| *a | Protruding Part |
71076S
19.INSTALL REAR SEAT CUSHION COVER SUB-ASSEMBLY LH
71647F
20.INSTALL REAR SEAT INNER CUSHION EDGE PROTECTOR LH
21.INSTALL SEAT CUSHION COVER WITH PAD
71585
22.INSTALL REAR NO. 2 SEAT HINGE COVER RH
71586
23.INSTALL REAR NO. 2 SEAT HINGE COVER LH
72908B
24.INSTALL REAR SEAT CUSHION UNDER COVER SUB-ASSEMBLY LH
72649
25.INSTALL REAR SEAT CUSHION SUPPORT SPRING
71647G
26.INSTALL REAR SEAT CUSHION EDGE PROTECTOR
71301D
27.INSTALL REAR SEAT HINGE SUB-ASSEMBLY RH
71305C
28.INSTALL REAR SEAT STAY SUB-ASSEMBLY
71302D
29.INSTALL REAR SEAT HINGE SUB-ASSEMBLY LH
72779
30.INSTALL REAR SEAT HINGE PAWL GUIDE
72205B
31.INSTALL SEAT TRACK OPEN LEVER PIN SUB ASSEMBLY
71876K
32.INSTALL RECLINING ADJUSTER INSIDE COVER LH
71324G
33.INSTALL REAR NO. 2 SEAT CUSHION
71833A
34.INSTALL REAR NO. 1 SEAT RECLINING COVER RH
71844D
35.INSTALL REAR SEAT RECLINING COVER LH
36.INSTALL REAR NO. 1 SEAT ASSEMBLY LH
Install the rear No. 1 seat assembly LH (See page Vehicle Interior>SEAT>REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side)>INSTALLATION).