Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Bench Seat Type)
RM27T0E _58 Vehicle Interior _053737 SEAT _0261135 FRONT SEAT ASSEMBLY(for Bench Seat Type) A

SEAT  FRONT SEAT ASSEMBLY(for Bench Seat Type)  DISASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 71848A 1.REMOVE SEAT ADJUSTER COVER CAP RH

a.
B293849

Remove the 2 seat adjuster cover caps.


Hide 73240 2.REMOVE FRONT SEAT INNER BELT ASSEMBLY RH

Hide 72525A 3.REMOVE RECLINING ADJUSTER RELEASE HANDLE RH

a.
B294302E01
2.634,0.898 2.223,0.737 false 2.032,0.637 2.191,0.804 0.159,0.167 10 *1

Using a screwdriver, detach the claw and remove the reclining adjuster release handle RH.

HINT:

Tape the screwdriver tip before use.


Text in Illustration
*1 Protective Tape


Hide 71811D 4.REMOVE FRONT SEAT CUSHION SHIELD RH

a.
B294303

Detach the 2 rubber bands.


b.
B294304E01
0.913,0.664 1.521,0.278 false 1.538,0.198 1.718,0.353 0.179,0.155 10 *1 2.627,2.826 2.007,3.191 false 1.805,3.106 1.984,3.261 0.179,0.155 10 *2

Remove the screw.


c.

Detach the hook and claw.


d.

Detach the clip and guide, and remove the front seat cushion shield RH.

Text in Illustration
*1 Hook
*2 Guide


Hide 71274 5.REMOVE FRONT SEAT HINGE KNOB

a.
B292632

Twist the front seat hinge knob in the direction indicated by the arrow and remove it.


Hide 71831D 6.REMOVE FRONT SEAT HINGE COVER RH

a.
B292634

Remove the 2 screws.


b.

Detach the 2 hooks and remove the front seat hinge cover RH.


Hide 71873 7.REMOVE FRONT SEAT LOWER CUSHION SHIELD RH

a.
B292635

Remove the 2 screws.


b.

Detach the hook and remove the front seat lower cushion shield RH.


Hide 71270 8.REMOVE INNER SEAT BRACKET ASSEMBLY RH

a.
B294306

Temporarily install the front seat hinge knob.


b.

Operate the front seat hinge knob and fold down the seat armrest assembly RH.


c.
B294307

Raise the seat armrest assembly RH 3 notches.


d.

Remove the front seat hinge knob.


e.
B292640

Remove the 4 bolts and inner seat bracket assembly RH.


Hide 72880 9.REMOVE SEAT ARMREST ASSEMBLY RH

a.
B292641

Remove the bolt and seat armrest assembly RH.


Hide 71847A 10.REMOVE FRONT SEAT ARMREST HOLE BOARD COVER

a.
B292644

Remove the front seat armrest hole board cover from the seat armrest assembly RH.


Hide 71081S 11.REMOVE FRONT SEATBACK SIDE COVER SUB-ASSEMBLY RH

a.
B294308

Detach the hook and open the front seatback side cover sub-assembly RH.


b.

Remove the front seatback side cover sub-assembly RH with the front seatback inside pad RH.


c.

Remove the front seatback side cover sub-assembly RH from the front seatback inside pad RH.


Hide 12.REMOVE FRONT SEAT CUSHION COVER WITH PAD

a.
B294309

Bend out the 2 cushion edge tabs.

NOTICE:

Be careful not to break the cushion edge tabs.



b.

Using a clip remover, remove the clip.


c.

Remove the hog ring and detach the hooks.

B294311E01
5.42,2.172 5.937,1.587 false 5.954,1.512 6.149,1.663 0.195,0.151 10 *1

Text in Illustration
*1 Hog Ring - -


d.
B294313

Detach the 2 clamps and remove the connector holder.


e.

Remove the front seat cushion cover with pad from the front seat frame assembly with adjuster RH.


Hide 82666M 13.REMOVE CONNECTOR HOLDER

a.
B294314

Using a precision screwdriver, detach the claw and remove the connector holder.


Hide 71071S 14.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

a.
B294315E01
2.028,1.29 2.202,1.446 0.173,0.156 10 *1 2.028,1.29 1.815,1.007 false 0.332,0.583 0.505,0.739 0.173,0.156 10 *1 0.716,0.136 0.889,0.292 0.173,0.156 10 *2 0.555,0.675 1.156,0.946 false 0.927,0.222 1.289,0.727 false

Remove the hog rings.


b.

Detach the hook.

Text in Illustration
*1 Hog Ring
*2 Hook


c.
B294316E01
3.06,0.585 3.230,0.752 0.170,0.166 10 *1 2.28,0.869 3.041,0.693 false

Cut off the tack pin.

Text in Illustration
*1 Tack Pin


d.

Remove the hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.


Hide 71073S 15.REMOVE SEPARATE TYPE FRONT SEATBACK COVER

a.
B294318

Remove the hog rings, and then roll up the separate type front seatback cover.


b.
B294320

Remove the hog rings, detach the 2 straps of the separate type front seatback cover, and then roll up the separate type front seatback cover.


c.

Detach the fastening tape and hook, and then roll up the separate type front seatback cover.


d.

Remove the hog rings and roll up the separate type front seatback cover.

B294322E01
6.82,0.49 7.004,0.669 0.184,0.179 10 *1 6.108,0.943 6.809,0.579 false 0.281,0.245 0.464,0.424 0.184,0.179 10 *2 0.963,0.537 0.457,0.323 false 2.826,0.586 2.987,0.744 0.162,0.158 10 *3 2.991,0.648 3.327,0.46 false 2.991,0.648 3.467,0.499 false 2.991,0.648 3.608,0.529 false 4.097,0.04 4.259,0.197 0.162,0.158 10 *3 3.481,0.203 4.088,0.114 false 3.755,0.285 4.088,0.114 false

Text in Illustration
*1 Fastening Tape *2 Hook
*3 Hog Ring - -


e.
B294324

Detach the 4 claws and remove the 2 front seat headrest supports and separate type front seatback cover from the separate type front seatback pad.


Hide 71551S 16.REMOVE SEPARATE TYPE FRONT SEATBACK PAD

a.
B294325

Remove the separate type front seatback pad from the front seat frame assembly with adjuster RH.


Hide 17.REMOVE FRONT SEATBACK PROTECTOR

B294326E01
0.208,1.12 0.390,1.273 0.183,0.152 10 *1 0.412,1.183 1.397,0.381 false 0.412,1.183 2.112,0.521 false

a.

Remove the front seatback protector.


b.

Remove any remaining double-sided tape.

Text in Illustration
*1 Double-sided Tape


Hide 71397A 18.REMOVE CENTER SEAT HINGE COVER

B294327

a.

Remove the screw.


b.

Detach the guide and remove the center seat hinge cover.


Hide 71861 19.REMOVE FRONT SEAT INNER CUSHION SHIELD RH

B294328

a.

Remove the 2 screws.


b.

Detach the hook and claw and remove the front seat inner cushion shield RH.


Hide 71876A 20.REMOVE RECLINING ADJUSTER INSIDE COVER LH

B292661

a.

Remove the screw.


b.

Detach the guide and remove the reclining adjuster inside cover LH.


Hide 71875B 21.REMOVE RECLINING ADJUSTER INSIDE COVER RH

HINT:

Use the same procedure described for the LH side.


Hide 71876 22.REMOVE RECLINING ADJUSTER OUTSIDE COVER LH

B292660

a.

Remove the screw and reclining adjuster outside cover LH.


Hide 71875A 23.REMOVE RECLINING ADJUSTER OUTSIDE COVER RH

HINT:

Use the same procedure described for the LH side.


Hide 72497 24.REMOVE OUTER VERTICAL ADJUSTER BRACKET COVER

B294329

a.

Remove the screw.


b.

Detach the claw and remove the outer vertical adjuster bracket cover.


Hide 71537D 25.REMOVE FRONT SEAT CUSHION EDGE PROTECTOR

a.
B294330

Remove the 2 front seat cushion edge protectors.


Hide 71537C 26.REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH

a.
B294332

Remove the front seat cushion edge protector RH.