Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY
RM27T0E _58 Vehicle Interior _053738 SEAT BELT _0261146 FRONT SEAT INNER BELT ASSEMBLY A

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE FRONT SEAT ASSEMBLY LH

a.

for Manual Seat:

Remove the front seat assembly LH (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>REMOVAL).


b.

for Power Seat:

Remove the front seat assembly LH (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Power Seat)>REMOVAL).


Hide 73240 2.REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)

a.

Disconnect the connector and detach the 4 clamps.


b.
B241691

Remove the nut and front seat inner belt assembly LH.


c.

Remove the front seat belt anchor plate.


Hide 73230 3.REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Passenger Side)

a.

for Manual Seat, Power Seat 4 Way Seat Type:

Disconnect the 2 connectors and detach the 3 clamps.


b.

for Power Seat 8 Way Seat Type:

Disconnect the 2 connectors and detach the 6 clamps.


c.

Remove the nut and front seat inner belt assembly RH.


d.

Remove the front seat belt anchor plate.


Hide 73230 4.REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Bench Seat Type)

a.
B294020

Remove the front seat assembly RH (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Bench Seat Type)>REMOVAL).


b.

Disconnect the occupant detection sensor connector and detach the 3 wire harness clamps.


c.

Remove the nut.


d.
B295930

Pass the front seat inner belt assembly RH through the band of the front seat cushion cover as shown in the illustration to remove the front seat inner belt assembly RH.