Home › Vehicle Interior › SEAT BELT › REAR CENTER SEAT OUTER BELT ASSEMBLY (for 60/40 Split Double-folding Seat Type RH Side)
RM27T0E _58 Vehicle Interior _053738 SEAT BELT _0261152 REAR CENTER SEAT OUTER BELT ASSEMBLY(for 60/40 Split Double-folding Seat Type RH Side) A

SEAT BELT  REAR CENTER SEAT OUTER BELT ASSEMBLY(for 60/40 Split Double-folding Seat Type RH Side)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 73310A 1.INSTALL NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY RH

U148027E03
1.625,1.49 2.802,1.198 2.802,1.198 1.948,1.583 true 2.177,0.479 2.375,0.656 0.198,0.177 10 false *1 1.073,1.802 1.26,2.021 0.188,0.219 10 false *2 2.854,1.073 3.031,1.281 0.177,0.208 10 false a

NOTICE:

When installing the retractor, make sure the claws of the vehicle (labeled "a" in the illustration) only contact the installation areas of the retractor.


a.

Align the claws with the seat belt positioning holes and install the retractor of the seat belt with the nut and bolt as shown in the illustration.

HINT:

First install the bolt, and then install the nut.


Torque:
for bolt : 7.5 N*m (76 kgf*cm, 66 in.*lbf)
for nut : 42 N*m (428 kgf*cm, 31 ft.*lbf)

Text in Illustration
*1 Bolt
*2 Nut


Hide 19.INSTALL REAR SEAT ASSEMBLY RH