Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1.REMOVE REAR SEAT ASSEMBLY RH
Remove the rear seat assembly RH (See page Vehicle Interior>SEAT>REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type RH Side)>REMOVAL).
71825B
2.REMOVE REAR SEAT CUSHION MOULDING RH
73380C
3.REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY RH
Remove the bolt and inner belt.