Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
64910M
1.REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
58649C
2.REMOVE MAT SET PLATE COVER
58574A
3.REMOVE REAR FLOOR MAT REAR SUPPORT PLATE
62538C
4.REMOVE QUARTER TRIM COVER HOLE LH
58570C
5.REMOVE REAR FLOOR CARPET ASSEMBLY
64725D
6.REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
64937A
7.REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)
64712F
8.REMOVE FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)
73233
9.REMOVE OUTER LAP BELT ANCHOR COVER
64740C
10.REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
Remove the bolt and disconnect the front seat outer belt floor anchor.
Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.
Remove the 3 bolts and 2 screws.
Detach the 9 claws and 12 clips and remove the deck trim side panel.
62640P
11.REMOVE REAR QUARTER TRIM PANEL ASSEMBLY LH
73370C
12.REMOVE REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH
Remove the bolt and rear No. 1 seat outer belt shoulder anchor.
Remove the 2 bolts and rear No. 1 seat outer belt assembly.