Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)
RM27T0E _58 Vehicle Interior _053739 HEATING / AIR CONDITIONING _0261169 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  B1441/41  Air Mix Damper Control Servo Motor Circuit (Passenger Side)  


DESCRIPTION

The damper servo sub-assembly (front passenger side air mix damper servo) sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on the signals to move the air mix damper (for front passenger side) to any position. As a result, the air mix damper (for front passenger side) varies the mixture of hot air from the heater core and cold air from the evaporator so that the temperature of the air blowing toward the front passenger side is as requested.

HINT:

Confirm that no mechanical problem is present because this trouble code may be stored when either a damper link or damper is mechanically locked.


DTC Code DTC Detection Condition Trouble Area
B1441/41 The air mix damper position does not change when the air conditioning amplifier assembly operates the damper servo sub-assembly (front passenger side air mix damper servo).
·

Damper servo sub-assembly (front passenger side air mix damper servo)

·

Air conditioning harness assembly

·

Air conditioning amplifier assembly



WIRING DIAGRAM

E180810E97
5.323,0.427 5.458,0.583 0.135,0.156 10 false 4 5.323,0.979 5.448,1.135 0.125,0.156 10 false 3 5.323,1.51 5.448,1.667 0.125,0.156 10 false 2 3.156,1.063 3.354,1.208 0.198,0.146 10 false IC 0.052,2.052 2.479,2.417 2.427,0.365 10 false Damper Servo Sub-assembly (Front Passenger Side Air Mix Damper Servo) 5.531,2.115 7.115,2.594 1.583,0.479 10 false Air Conditioning Amplifier Assembly 5.542,1.969 5.74,2.125 0.198,0.156 10 false z1 2.948,2.115 5.198,2.26 2.25,0.146 10 false Air Conditioning Harness Assembly 5.583,0.521 6.125,0.677 0.542,0.156 10 false B BUS 5.583,1.042 5.979,1.198 0.396,0.156 10 false BUS 5.583,1.594 6.063,1.75 0.479,0.156 10 false BUS G

PROCEDURE

1.CHECK FOR DTC


Result
Result Proceed to
DTC B1441/41 is not output A
DTC B1441/41 is output B
DTC B1441/41 and B1497/97 are output C


A

B

2.READ VALUE USING INTELLIGENT TESTER (FRONT PASSENGER SIDE AIR MIX DAMPER SERVO)

C

2.READ VALUE USING INTELLIGENT TESTER (FRONT PASSENGER SIDE AIR MIX DAMPER SERVO)
a.

Use the Data List to check if the damper servo sub-assembly (front passenger side air mix damper servo) is functioning properly (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>DATA LIST / ACTIVE TEST).

Air Conditioner
Tester Display Measurement Item/Range Normal Condition Diagnostic Note
Air Mix Servo Targ Pulse (P) Damper servo sub-assembly (front passenger side air mix damper servo) target pulse / Min.: 0, Max.: 255 for LHD:
·

112 or 127 (pulse): MAX COOL

·

21 or 31 (pulse): MAX HOT


for RHD:
·

107 (pulse): MAX COOL

·

26 (pulse): MAX HOT


-
Air Mix Servo Actual Pulse (P) Damper servo sub-assembly (front passenger side air mix damper servo) actual pulse / Min.: 0, Max.: 255 for LHD:
·

112 or 127 (pulse): MAX COOL

·

21 or 31 (pulse): MAX HOT


for RHD:
·

107 (pulse): MAX COOL

·

26 (pulse): MAX HOT


-

OK:

The display is as specified in the normal condition column.



Result
Result Proceed to
OK (When troubleshooting according to the DTC) A
OK (When troubleshooting according to Problem Symptoms Table) B
Both target pulse and actual pulse do not display C
Target pulse displays normally, but actual pulse does not display D


A

3.CHECK FOR DTC

B

C

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

D

4.CHECK DAMPER SERVO SUB-ASSEMBLY (FRONT PASSENGER SIDE AIR MIX DAMPER SERVO)
4.CHECK DAMPER SERVO SUB-ASSEMBLY (FRONT PASSENGER SIDE AIR MIX DAMPER SERVO)
a.

Replace the damper servo sub-assembly (front passenger side air mix damper servo) (See page Vehicle Interior>HEATING / AIR CONDITIONING>FRONT AIR CONDITIONING UNIT>DISASSEMBLY).

HINT:

Since the damper servo sub-assembly (front passenger side air mix damper servo) cannot be inspected while it is removed from the vehicle, replace the damper servo sub-assembly (front passenger side air mix damper servo) with a new or normally functioning one.






OK

END (DAMPER SERVO SUB-ASSEMBLY [FRONT PASSENGER SIDE AIR MIX DAMPER SERVO] IS FAULTY)

NG

5.CHECK AIR CONDITIONING HARNESS ASSEMBLY
5.CHECK AIR CONDITIONING HARNESS ASSEMBLY

OK

END (AIR CONDITIONING HARNESS ASSEMBLY IS FAULTY)

NG

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY