88645H
1.INSTALL NO. 1 PRESSURE SWITCH
Sufficiently apply compressor oil to a new O-ring and the fitting surface of the No. 1 pressure switch.
ND-OIL 8 or equivalent
Install the O-ring to the No. 1 pressure switch.
Install the No. 1 pressure switch.
| *a | Hold |
| *b | Turn |
Connect the connector.
88719A
2.INSTALL AIR CONDITIONING PRESSURE SENSOR
Sufficiently apply compressor oil to a O-ring and the fitting surface of the new air conditioning pressure sensor.
ND-OIL 8 or equivalent
Install the air conditioning pressure sensor.
| *a | Hold |
| *b | Turn |
Connect the connector.
3.CHARGE REFRIGERANT
4.WARM UP ENGINE
5.CHECK FOR REFRIGERANT GAS LEAK
53111
6.INSTALL RADIATOR GRILLE
Install the radiator grille (See page Vehicle Exterior>EXTERIOR PANELS / TRIM>RADIATOR GRILLE>INSTALLATION).
53292A
7.INSTALL UPPER RADIATOR SUPPORT SEAL