82210K
1.INSTALL REAR EVAPORATOR TEMPERATURE SENSOR
Move the tip of the sensor in the direction indicated by the arrow in the illustration to install it to the bracket plate.
Attach the 2 claws to install the sensor.
88501R
2.INSTALL REAR EVAPORATOR SUB-ASSEMBLY
88515B
3.INSTALL REAR COOLING UNIT EXPANSION VALVE
4.INSTALL BLOWER MOTOR CONTROLLER
87103D
5.INSTALL REAR BLOWER WITH FAN MOTOR SUB-ASSEMBLY
6.INSTALL HEATER BRACKET
87107B
7.INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY
88710A
8.INSTALL AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY
87106X
9.INSTALL REAR MODE DAMPER SERVO SUB-ASSEMBLY
10.INSTALL COOLER BRACKET
87106W
11.INSTALL REAR AIR MIX DAMPER SERVO SUB-ASSEMBLY
87217G
12.INSTALL REAR SIDE NO. 4 AIR DUCT (w/ Rear Air Duct)