Home › Vehicle Interior › INTERIOR PANELS / TRIM › FRONT CONSOLE BOX(for Manual Transmission) › 2015.06–2017.08
RM27T0E _58 Vehicle Interior _053741 INTERIOR PANELS / TRIM _0261218 FRONT CONSOLE BOX(for Manual Transmission) A

INTERIOR PANELS / TRIM  FRONT CONSOLE BOX(for Manual Transmission)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).



PROCEDURE

Hide 58910C 1.INSTALL REAR CONSOLE BOX ASSEMBLY

a.

Connect each connector.


b.

Install the rear console box with the 2 screws, clip and 5 bolts.


Hide 58861B 3.INSTALL NO. 1 CONSOLE BOX DUCT (for Single Air Conditioning System)

Hide 55084E 4.INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY (w/ Cool Box)

Hide 5.INSTALL CONSOLE PANEL SUB-ASSEMBLY

a.

Connect each connector.


b.

Attach the 8 clips and 2 claws to install the console panel.


Hide 33504F 6.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

B363431

a.

Install the shift lever knob and twist it in the direction indicated by the arrow.


Hide 55607 8.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 55606 10.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 58831A 11.INSTALL FRONT CONSOLE UPPER PANEL GARNISH

a.

w/o Seat Heater System:

i.

Connect the connector.


ii.

Attach the 5 clips to install the front console upper panel garnish.



b.

w/ Seat Heater System, w/ Climate Control Seat System:

i.

Connect each connector.


ii.

Attach the 5 clips to install the front console upper panel garnish.



Hide 55448A 14.INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

HINT:

Use the same procedure described for the No. 2 instrument panel finish panel cushion.


Hide 84010A 16.INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY