Home › Vehicle Exterior › WINDOW / GLASS › QUARTER WINDOW GLASS (for 3 Door)
RM27T0E _59 Vehicle Exterior _053742 WINDOW / GLASS _0261238 QUARTER WINDOW GLASS(for 3 Door) A

WINDOW / GLASS  QUARTER WINDOW GLASS(for 3 Door)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the LH and RH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 63310 1.REMOVE ROOF HEADLINING ASSEMBLY

a.

Hide 62432B 2.REMOVE NO. 1 ROOF SIDE RAIL GARNISH LH

B242805E01
2.179,2.433 1.942,2.752 false 1.8,2.754 2.007,2.930 0.207,0.176 10 *1

a.

Detach the 5 clips.


b.

Cut off clip A.


c.

Remove the roof side rail garnish.


d.

Remove clip A from the vehicle body.

Text in Illustration
*1 Clip A


Hide 62720A 3.REMOVE QUARTER WINDOW ASSEMBLY LH

B239030E02
0.51,1.177 0.292,1.344 false 1.51,3.177 1.51,3.417 false 0.115,1.271 0.396,1.469 0.281,0.198 10 false *1 1.427,3.458 1.688,3.677 0.26,0.219 10 false *2

HINT:

Apply protective tape to the outer surface of the vehicle body to prevent scratches.


NOTICE:

When separating the quarter window glass from the vehicle, be careful not to damage the vehicle paint or interior/exterior ornaments.


a.

From the interior, insert a piano wire between the vehicle body and quarter window glass as shown in the illustration.

Text in Illustration
*1 Protective Tape
*2 Piano Wire


b.
B242804E01
1.469,1.167 1.188,1.167 false 1.271,0.604 1.042,0.208 1.042,0.208 0.885,0.208 true 2.385,1.708 2.135,1.833 2.135,1.833 2.135,1.917 false 1.021,1.083 1.24,1.26 0.219,0.177 10 false *1 2.063,1.948 2.292,2.135 0.229,0.188 10 false *2 0.677,0.125 0.885,0.344 0.208,0.219 10 false *3

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


c.

Cut through the adhesive by pulling the piano wire around the quarter window glass.

NOTICE:

Leave as much adhesive on the vehicle body as possible when removing the quarter window glass.


Text in Illustration
*1 Piano Wire
*2 Wooden Blocks
*3 Protective Tape


d.

Using suction cups, remove the quarter window glass.


Hide 4.CLEAN VEHICLE BODY

B106081E41
0.5,1.302 0.781,0.729 0.781,0.729 0.958,0.729 true 2.271,1.458 2.552,0.76 2.552,0.76 2.719,0.76 false 2.427,1.583 2.427,1.76 false 0.813,1.552 0.813,1.74 false 1.063,0.646 1.302,0.844 0.24,0.198 10 false *1 2.75,0.708 2.99,0.906 0.24,0.198 10 false *1 0.729,1.771 0.969,1.969 0.24,0.198 10 false *2 2.344,1.813 2.583,2.01 0.24,0.198 10 false *2

a.

Clean and shape the contact surface of the vehicle body.

Text in Illustration
*1 Adhesive
*2 Vehicle Body

i.

On the contact surface of the vehicle body, use a knife to cut away excess adhesive as shown in the illustration.

HINT:

Leave as much adhesive on the vehicle body as possible.


NOTICE:

Be careful not to damage the vehicle body.



ii.

Clean the contact surface of the vehicle body with cleaner.

HINT:

Even if all the adhesive has been removed, clean the vehicle body.