A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84871
1.INSTALL OUTER MIRROR HEATER SWITCH ASSEMBLY (for LHD)
Attach the 2 claws to install the outer mirror heater switch assembly.
84871
2.INSTALL OUTER MIRROR HEATER SWITCH ASSEMBLY (for RHD)
Attach the 2 claws to install the outer mirror heater switch assembly.
55480D
3.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY