Home › Vehicle Exterior › SLIDING ROOF / CONVERTIBLE › SLIDING ROOF SYSTEM
RM27T0E _59 Vehicle Exterior _053743 SLIDING ROOF / CONVERTIBLE _0261242 SLIDING ROOF SYSTEM J

SLIDING ROOF / CONVERTIBLE  SLIDING ROOF SYSTEM  Remote Control System does not Operate  


DESCRIPTION

The main body ECU (multiplex network body ECU) receives remote control signals from the door key cylinder and wireless transmitter. When the sliding roof is operated by a remote control signal, sliding roof operation signals are input via LIN communication and the sliding roof motor starts moving.

CAUTION / NOTICE / HINT

NOTICE:
·

The sliding roof key-linked function and sliding roof wireless transmitter-linked function are linked with the power window key-linked function and power window wireless transmitter-linked function. Make sure that the power window and sliding roof customize settings are ON.

·

When the sliding roof drive gear sub-assembly is removed and reinstalled or replaced, the sliding roof drive gear sub-assembly must be initialized (See page Vehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM>INITIALIZATION).

·

Since the sliding roof system has functions that use LIN communication, first confirm that there is no malfunction in the LIN communication system with the How to Proceed with Troubleshooting procedure (See pageVehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).



PROCEDURE

1.CHECK POWER WINDOW CONTROL FUNCTION
a.

Check the power window key-linked function and power window wireless transmitter-linked function (See page Vehicle Exterior>WINDOW / GLASS>POWER WINDOW CONTROL SYSTEM>OPERATION CHECK).

OK:

The power window control functions operate normally.


Result
Result Proceed to
OK A
Wireless transmitter-linked function does not operate (w/ Entry and Start System) B
Wireless transmitter-linked function does not operate (w/o Entry and Start System) C
Key-linked function does not operate D



A

REPLACE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY

B

C

D