Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR (for Front Side)
RM27T0E _59 Vehicle Exterior _053746 WIPER / WASHER _0261263 WASHER MOTOR(for Front Side) A

WIPER / WASHER  WASHER MOTOR(for Front Side)  INSTALLATION  


PROCEDURE

Hide 85310 1.INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

a.

Install the windshield washer motor and pump assembly to the packing of the windshield washer jar assembly.


Hide 85330 2.INSTALL WINDSHIELD WASHER JAR ASSEMBLY

a.

Attach the guide to install the windshield washer jar assembly.


b.
E281646E03
0.458,1.708 0.688,1.896 0.229,0.188 10 true (1) 2.646,1.865 2.917,2.052 0.271,0.188 10 true (2) 1.49,0.427 1.719,0.615 0.229,0.188 10 true (3)

Install the 3 screws.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)

NOTICE:

Tighten the screws in the order shown in the illustration.



c.

w/o Headlight Cleaner System:

Connect the connector.


d.

w/ Headlight Cleaner System:

Connect the 3 connectors.


Hide 85301 3.INSTALL WASHER INLET SUB-ASSEMBLY

a.

Attach the claw to install the washer inlet sub-assembly.


Hide 4. FILL WASHER JAR WITH WASHER FLUID

a.

Connect the washer hose to the hose of the windshield washer motor and pump assembly and fill the windshield washer jar assembly with washer fluid.


Hide 53805 5.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

a.

Install the front fender splash shield sub-assembly RH with 13 new grommets.


b.

Install the screw.


Hide 76621D 6.INSTALL FRONT FENDER MUDGUARD RH

a.

Install the front fender mudguard RH with the 4 screws and 2 clips.


Hide 7.INSTALL FRONT WHEEL

Torque:
for Aluminum Wheel : 103 N*m (1050 kgf*cm, 76 ft.*lbf)
for Steel Wheel : 112 N*m (1137 kgf*cm, 82 ft.*lbf)

Hide 11. PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light)

Hide 12.INSPECT FOG LIGHT AIMING (w/ Fog Light)

Hide 13.ADJUST FOG LIGHT AIMING (w/ Fog Light)