Home › Vehicle Exterior › LIGHTING (EXT) › STOP LIGHT SWITCH
RM27T0E _59 Vehicle Exterior _053747 LIGHTING (EXT) _0261288 STOP LIGHT SWITCH A

LIGHTING (EXT)  STOP LIGHT SWITCH  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 84345 1.INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER

a.

Attach the 2 claws to install a new stop light switch mounting adjuster.


Hide 84340 2.INSTALL STOP LIGHT SWITCH ASSEMBLY

U116606E01
0.284,0.565 0.476,0.744 0.192,0.179 10 *1 1.076,1.824 1.268,2.003 0.192,0.179 10 *2 2.22,1.827 2.412,2.006 0.192,0.179 10 *3 1.065,1.388 1.145,1.824 false 2.208,1.497 2.288,1.827 false 0.824,0.724 0.463,0.656 false

a.

Install the stop light switch assembly to the stop light switch mounting adjuster until the switch body slightly touches the brake pedal.

NOTICE:

Do not depress the brake pedal.


Text in Illustration
*1 Brake Pedal
*2 Stop Light Switch Mounting Adjuster
*3 Stop Light Switch Assembly


b.
U116607E01
0.267,0.943 0.459,1.122 0.192,0.179 10 *1 0.942,1.712 1.134,1.891 0.192,0.179 10 *a 2.073,1.771 2.265,1.950 0.192,0.179 10 *2 2.074,1.444 2.141,1.756 false 0.652,1.035 0.437,1.035 false

Rotate the stop light switch assembly clockwise so that the clearance is between 1.5 and 2.5 mm (0.0590 and 0.0984 in.) as shown in the illustration.

Text in Illustration
*1 Shaft
*2 Stop Light Switch Assembly
*a 1.5 to 2.5 mm

NOTICE:

Do not depress the brake pedal.



c.

Check the stop light switch assembly clearance.

Stop light switch assembly clearance:

1.5 to 2.5 mm (0.0590 to 0.0984 in.)



d.

Connect the connector to the stop light switch assembly.


Hide 55606 3.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY