53112E
1.INSTALL LOWER NO. 1 RADIATOR GRILLE
Attach the 18 claws to install the lower No. 1 radiator grille.
82112
2.INSTALL NO. 2 ENGINE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)
Attach the 7 clamps to install the No. 2 engine room wire.
89348
3.INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)
89341A
4.INSTALL NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)
85208A
5.INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)
85207A
6.INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)
Use the same procedure described for the LH side.
85271
7.INSTALL NO. 1 HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)
85045
8.INSTALL TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH (w/ Headlight Cleaner System)
85044
9.INSTALL TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH (w/ Headlight Cleaner System)
Use the same procedure described for the LH side.
81482C
10.INSTALL FOG LIGHT COVER LH (w/ Fog Light)
Attach the 3 clips to install the fog light cover LH.
Install the screw.
81481E
11.INSTALL FOG LIGHT COVER RH (w/ Fog Light)
Use the same procedure described for the LH side.
81220
12.INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)
81210A
13.INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)
Use the same procedure described for the LH side.
52148B
14.INSTALL FRONT BUMPER REINFORCEMENT STOPPER RH (w/ Fog Light)
Attach the 2 claws to install the front bumper reinforcement stopper RH.
52128B
15.INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light)
Attach the 3 clips to install the front bumper hole cover LH.
Install the screw.
52127D
16.INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light)
Use the same procedure described for the LH side.
76852B
17.INSTALL FRONT SPOILER LH (w/ Front Spoiler)
Install the front spoiler LH with the 2 front spoiler No. 1 retainers.
76851B
18.INSTALL FRONT SPOILER RH (w/ Front Spoiler)
Use the same procedure described for the LH side.
52114A
19.INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (w/ Bracket)
Install the front bumper extension mounting bracket with the 2 screws.