89348
1.INSTALL NO. 1 ULTRASONIC SENSOR RETAINER
Use the same procedure to install the No. 1 ultrasonic sensor retainer on the other side.
Align the keyhole and protrusion as shown in the illustration.
Install the No. 1 ultrasonic sensor retainer to the front bumper cover.
Do not damage the bumper cover with the protrusion when installing the retainer.
| *1 | Keyhole |
89341A
2.INSTALL NO. 1 ULTRASONIC SENSOR
Use the same procedure to install the No. 1 ultrasonic sensor on the other side.
Attach the 2 claws to install the No. 1 ultrasonic sensor.
Connect the connector.
52119A
3.INSTALL FRONT BUMPER COVER
53111
4.INSTALL RADIATOR GRILLE
53292A
5.INSTALL UPPER RADIATOR SUPPORT SEAL