A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).
67981
1.INSTALL NO. 2 BACK DOOR STIFFENER
Use the same procedure to install the No. 2 back door stiffener on the other side.
Attach the 2 claws to install a new No. 2 back door stiffener.
76085
2.INSTALL REAR SPOILER SUB-ASSEMBLY
Attach the 3 clips to install the rear spoiler.
Install the 6 bolts and 2 grommets.
Connect the connector.
76893E
3.INSTALL REAR SPOILER COVER RH
Attach the 2 clips to install the rear spoiler cover.
67938A
4.INSTALL BACK DOOR SIDE GARNISH LH
67937B
5.INSTALL BACK DOOR SIDE GARNISH RH
67939B
6.INSTALL CENTER BACK DOOR GARNISH