Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2015.06–2017.08
RM27T0E _58 Vehicle Interior _053733 METER / GAUGE / DISPLAY _0261082 METER / GAUGE SYSTEM Y

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  HOW TO PROCEED WITH TROUBLESHOOTING  


CAUTION / NOTICE / HINT

HINT:
·

Use these procedures to troubleshoot the combination meter.

·

*: Use the Techstream.



PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP
Result:
Proceed to
NEXT



NEXT

2.INSPECT BATTERY VOLTAGE
2.INSPECT BATTERY VOLTAGE
Standard voltage:

11 to 14 V


If the voltage is below 11 V, recharge or replace the battery before proceeding.

Result:
Proceed to
NEXT



NEXT

3.CHECK FOR DTC*
3.CHECK FOR DTC*
a.

Use the intelligent tester to check if the CANcommunication system is functioning normally.

Result:
Result Proceed to
DTC is not output A
CAN DTC is output (for LHD with Entryand Start System) B
CAN DTC is output (for LHD withoutEntry and Start System) C
CAN DTC is output (for RHD with Entryand Start System) D
CAN DTC is output (for RHD withoutEntry and Start System) E




A

4.CHECK FOR DTC*

B

C

D

E

4.CHECK FOR DTC*

A

5.PROBLEM SYMPTOMS TABLE

B

7.REPAIR OR REPLACE
5.PROBLEM SYMPTOMS TABLE

Result:
Result Proceed to
Fault is not listed in problem symptomstable A
Fault is listed in problem symptomstable B



A

6.OVERALL ANALYSIS AND TROUBLESHOOTING*

B

7.REPAIR OR REPLACE
6.OVERALL ANALYSIS AND TROUBLESHOOTING*

NEXT

7.REPAIR OR REPLACE
7.REPAIR OR REPLACE
Result:
Proceed to
NEXT



NEXT

8.CONFIRMATION TEST
8.CONFIRMATION TEST
Result:
Proceed to
NEXT



NEXT

END