Home › Power Source / Network › NETWORKING › LIN COMMUNICATION SYSTEM › 2016.08–2017.08
RM27T0E _57 Power Source / Network _053729 NETWORKING _0261030 LIN COMMUNICATION SYSTEM U

NETWORKING  LIN COMMUNICATION SYSTEM  TERMINALS OF ECU  


CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND DRIVER SIDE JUNCTION BLOCK ASSEMBLY


U169737E02
1.625,1.552 1.823,1.313 1.823,1.313 1.906,1.313 true 0.969,1.583 0.698,1.333 0.698,1.333 0.615,1.333 true 0.969,1.615 0.698,1.813 0.698,1.813 0.615,1.813 true 1.625,1.854 1.823,1.698 1.823,1.698 1.906,1.698 true 1.625,2.177 1.823,2.375 1.823,2.375 1.906,2.375 true 1.625,1.031 1.771,0.698 1.771,0.698 1.875,0.698 false 0.198,1.75 0.563,1.906 0.365,0.156 10 false 2H*B 0.25,1.26 0.542,1.417 0.292,0.156 10 false 2I*A 5.896,3.875 6.177,4.031 0.281,0.156 10 false G65 0.906,2.156 1.115,2.313 0.208,0.156 10 false 2F 5.854,1.5 6.063,1.656 0.208,0.156 10 false 2D 5.844,2.188 6.052,2.344 0.208,0.156 10 false 2A 1.073,2.771 1.281,2.927 0.208,0.156 10 false 2K 3.75,1.385 3.938,1.594 0.188,0.208 10 false A 1.969,1.25 2.292,1.396 0.323,0.146 10 false G65 1.969,1.635 2.292,1.781 0.323,0.146 10 false G64 1.969,2.292 2.292,2.438 0.323,0.146 10 false G63 3.583,3.875 3.865,4.031 0.281,0.156 10 false G64 0.74,5.188 0.958,5.344 0.219,0.156 10 false 2I 1.052,5.177 1.271,5.333 0.219,0.156 10 false *A 1.885,6.406 2.135,6.604 0.25,0.198 10 false 2D 4.938,6.406 5.188,6.635 0.25,0.229 10 false 2A 3.51,7.677 3.698,7.875 0.188,0.198 10 false A 3.948,5.177 4.146,5.333 0.198,0.156 10 false 2F 5.896,5.167 6.125,5.333 0.229,0.167 10 false 2K 1.094,3.885 1.375,4.042 0.281,0.156 10 false G63 1.563,5.188 1.781,5.344 0.219,0.156 10 false 2H 1.917,5.188 2.135,5.344 0.219,0.156 10 false *B 1.969,0.615 2.292,0.771 0.323,0.156 10 false *1

Text in Illustration
*A for LHD *B for RHD
*1 Main body ECU (multiplex network body ECU) - -

a.

Remove the main body ECU (multiplex network body ECU) from the driver side junction block assembly (See page Power Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>REMOVAL).


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G63-3 (GND2) - Body ground W-B - Body ground Ground Always Below 1 Ω
A-11 (GND1) - Body ground None - Body ground Ground Always Below 1 Ω
A-30 (BECU) - Body ground None - Body ground Battery power supply Always 11 to 14 V
A-32 (IG) - Body ground None - Body ground IG power supply Ignition switch ON 11 to 14 V



CHECK MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


a.
U169991E02
1.156,0.26 1.354,0.438 0.198,0.177 10 false K4 1.563,0.25 1.76,0.427 0.198,0.177 10 false *A 2.396,0.25 2.594,0.427 0.198,0.177 10 false *B 1.99,0.25 2.167,0.427 0.177,0.177 10 false J9

Disconnect the K4*1 or J9*2 multiplex network master switch assembly connector.

*1: for LHD

*2: for RHD


Text in Illustration
*A for LHD
*B for RHD


b.

Measure the resistance and voltage according to the value(s) in the table below.

for LHD
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
K4-12 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
K4-11 (B) - Body ground L - Body ground Battery power supply Always 11 to 14 V

for RHD
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
J9-12 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
J9-11 (B) - Body ground L - Body ground Battery power supply Always 11 to 14 V



CHECK FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH


a.
U169968E02
1.573,0.333 1.792,0.51 0.219,0.177 10 false K7

Disconnect the K7 front power window regulator motor assembly LH connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
K7-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
K7-2 (B) - Body ground R - Body ground*1
G - Body ground*2
Battery power supply Always 11 to 14 V

*1: for LHD

*2: for RHD




CHECK FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH


a.
U169969E02
1.583,0.333 1.771,0.51 0.188,0.177 10 false J7

Disconnect the J7 front power window regulator motor assembly RH connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
J7-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
J7-2 (B) - Body ground G - Body ground*1
R - Body ground*2
Battery power supply Always 11 to 14 V

*1: for LHD

*2: for RHD




CHECK REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (for 5 Door)


a.
U115898E04
1.552,0.333 1.781,0.51 0.229,0.177 10 false M4

Disconnect the M4 rear power window regulator motor assembly LH connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
M4-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
M4-2 (B) - Body ground W - Body ground Battery power supply Always 11 to 14 V



CHECK REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (for 5 Door)


a.
U115899E04
1.573,0.333 1.802,0.51 0.229,0.177 10 false L4

Disconnect the L4 rear power window regulator motor assembly RH connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
L4-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
L4-2 (B) - Body ground W - Body ground Battery power supply Always 11 to 14 V



CHECK SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY (w/ Sliding Roof System)


a.
U171226E04
1.573,0.25 1.969,0.521 0.396,0.271 10 false W20

Disconnect the W20 sliding roof drive gear sub-assembly connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
W20-12 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω
W20-8 (B) - Body ground W - Body ground Battery power supply Always 11 to 14 V



CHECK CERTIFICATION ECU (w/ Entry and Start System)


U169648E02
2.448,0.542 2.729,0.719 0.281,0.177 10 false G38 4.698,0.542 4.979,0.719 0.281,0.177 10 false G39

a.

Disconnect the G38 certification ECU connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G38-15 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω
G38-1 (+B) - Body ground V - Body ground Battery power supply Always 11 to 14 V
G38-16 (IG) - Body ground W - Body ground IG power supply Ignition switch ON 11 to 14 V



CHECK POWER MANAGEMENT CONTROL ECU (w/ Entry and Start System)


U169651E02
2.469,0.427 2.802,0.594 0.333,0.167 10 false G50 4.563,0.427 4.854,0.594 0.292,0.167 10 false G51

a.

Disconnect the G51 power management control ECU connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G51-6 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
G51-5 (GND2) - Body ground W-B - Body ground Ground Always Below 1 Ω
G51-1 (AM22) - Body ground B - Body ground Battery power supply Always 11 to 14 V
G51-2 (AM21) - Body ground B - Body ground Battery power supply Always 11 to 14 V



CHECK ID CODE BOX (w/ Entry and Start System)


U169634E02
3.583,0.167 3.917,0.344 0.333,0.177 10 false G37

a.

Disconnect the G37 ID code box connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G37-8 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
G37-1 (+B) - Body ground V - Body ground Battery power supply Always 11 to 14 V



CHECK STEERING LOCK ACTUATOR ASSEMBLY (STEERING LOCK ECU) (w/ Entry and Start System)


a.
U169970E02
1.594,0.271 1.875,0.427 0.281,0.156 10 false G35

Disconnect the G35 steering lock actuator assembly (steering lock ECU) connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G35-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
G35-7 (B) - Body ground G - Body ground Battery power supply Always 11 to 14 V
G35-6 (IG2) - Body ground W - Body ground IG power supply Ignition switch ON 11 to 14 V



CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY


U170044E02
1.615,0.302 1.906,0.479 0.292,0.177 10 false G24 3.969,0.313 4.26,0.49 0.292,0.177 10 false G25 5.896,0.302 6.188,0.479 0.292,0.177 10 false z1

a.

Disconnect the G25 air conditioning amplifier assembly connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G25-14 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
G25-21 (B) - Body ground V - Body ground Battery power supply Always 11 to 14 V
G25-1 (IG+) - Body ground L - Body ground IG power supply Ignition switch ON 11 to 14 V



CHECK INTEGRATION CONTROL AND PANEL ASSEMBLY


a.
U169972E02
1.594,0.302 1.875,0.448 0.281,0.146 10 false G23

Disconnect the G23 integration control and panel assembly connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G23-4 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
G23-5 (IG+) - Body ground L - Body ground IG power supply Ignition switch ON 11 to 14 V



CHECK AIR CONDITIONING CONTROL ASSEMBLY (w/ Rear Air Conditioning System)


a.
U170735E02
1.677,0.302 1.875,0.448 0.198,0.146 10 false T7

Disconnect the T7 air conditioning control assembly connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
T7-8 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω
T7-1 (IG) - Body ground L - Body ground IG power supply Ignition switch ON 11 to 14 V



CHECK RAIN SENSOR (w/ Rain Sensor)


a.
U116123E04
1.615,0.302 1.927,0.531 0.313,0.229 10 false W6

Disconnect the W6 rain sensor connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
W6-1 (ES) - Body ground W-B - Body ground Ground Always Below 1 Ω
W6-4 (SIG) - Body ground GR - Body ground IG power supply Ignition switch ON 11 to 14 V



CHECK WINDSHIELD WIPER RELAY ASSEMBLY (w/ Rain Sensor)


C358461E01
1.479,0.333 1.896,0.604 0.417,0.271 1.521,0.385 2.135,0.583 0.615,0.198 10 false G120

a.

Disconnect the G120 windshield wiper relay assembly connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

for LHD
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G120-1 (EW) - Body ground W-B - Body ground Ground Always Below 1 Ω
G120-17 (+B) - Body ground G - Body ground Battery power supply Always 11 to 14 V
G120-3 (WIG) - Body ground G - Body ground IG power supply Ignition switch ON 11 to 14 V

for RHD (for RH Side Type Wiper Switch)
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G120-9 (EW) - Body ground W-B - Body ground Ground Always Below 1 Ω
G120-11 (+B) - Body ground G - Body ground Battery power supply Always 11 to 14 V
G120-7 (WIG) - Body ground G - Body ground IG power supply Ignition switch ON 11 to 14 V

for RHD (for LH Side Type Wiper Switch)
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G120-1 (EW) - Body ground W-B - Body ground Ground Always Below 1 Ω
G120-17 (+B) - Body ground G - Body ground Battery power supply Always 11 to 14 V
G120-3 (WIG) - Body ground G - Body ground IG power supply Ignition switch ON 11 to 14 V



CHECK DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY (w/ Double Locking System)


a.
U169971E02
1.604,0.406 1.885,0.573 0.281,0.167 10 false G49

Disconnect the G49 double lock door control relay assembly connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G49-14 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
G49-7 (CPUB) - Body ground P - Body ground Battery power supply Always 11 to 14 V
G49-1 (+B) - Body ground R - Body ground Battery power supply Always 11 to 14 V



CHECK DRIVING SUPPORT SWITCH CONTROL ECU (for Manual Transmission, w/ Multi-function Switch)


a.
U169990E02
1.521,0.292 1.802,0.469 0.281,0.177 10 false G76

Disconnect the G76 driving support switch control ECU connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G76-16 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
G76-6 (+B) - Body ground L - Body ground Battery power supply Always 11 to 14 V
G76-7 (IG) - Body ground L - Body ground IG power supply Ignition switch ON 11 to 14 V



CHECK DRIVING SUPPORT SWITCH CONTROL ECU (for Automatic Transmission, w/ Multi-function Switch)


a.

Disconnect the G163 driving support switch control ECU connector.

U170368E01
4,0.615 4.427,0.781 0.427,0.167 10 false G163 2.875,0.615 3.302,0.781 0.427,0.167 10 false G162


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G163-7 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
G163-8 (+B) - Body ground L - Body ground Battery power supply Always 11 to 14 V
G163-10 (IG) - Body ground L - Body ground IG power supply Ignition switch ON 11 to 14 V



CHECK COMBINATION METER ASSEMBLY


U170644E02
1.615,0.25 1.906,0.427 0.292,0.177 10 false G6

a.

Disconnect the G6 combination meter assembly connector.


b.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G6-21 (E2) - Body ground BR - Body ground Ground Always Below 1 V
G6-26 (B) - Body ground L - Body ground Battery power supply Always 11 to 14 V
G6-28 (IG+) - Body ground R - Body ground IG power supply Ignition switch ON 11 to 14 V