89491
1.INSTALL ENGINE OIL LEVEL SENSOR
Install the engine oil level sensor to the oil level sensor bracket with the 2 bolts.
Attach the clamp to the oil level sensor brecket.
Install the 2 stud bolts to the oil pan sub-assembly.
Install the oil level sensor bracket with the 2 nuts.
Apply a light coat of engine oil to the O-ring of the engine oil level sensor.
Install a new clip to the engine oil level sensor.
Connect the engine oil level sensor connector.
12102A
2.INSTALL NO. 2 OIL PAN SUB-ASSEMBLY
3.INSTALL WIRING HARNESS CLAMP BRACKET (w/ Urea SCR System)
Install the wiring harness clamp bracket with the bolt.
Attach the 3 clamps to connect the wire harness.
4.ADD ENGINE OIL
5.INSPECT FOR OIL LEAK
6.INSPECT ENGINE OIL LEVEL
51450
7.INSTALL REAR ENGINE UNDER COVER ASSEMBLY